Ariston Microgenus / Microsystem Pressure Gauge 0-4 Bar 40mm Ref. 65100695
RefurbishedAristonPressure gauges - Aquastats

Ariston Microgenus / Microsystem Pressure Gauge 0-4 Bar 40mm Ref. 65100695

15 €VAT includedIn stock · 1 unit

Pressure gauge for boiler. The available photo is a rear or side view of the part and does not show any screen printing, brand, or readable code. The manufacturer of the component and its reference code are not specified. Check your boiler model in the compatibility list before ordering this part.

Spare parts related to Ariston Microgenus

Compatibility

Ariston boilers compatible with reference 65100695

Pressure gauge with reference 65100695. 18 confirmed compatibilities with two independent sources: Microgenus 23 MFFI and Microgenus MF27. Verify the printed reference on your part before purchasing.

Compatibility confirmed

Boiler modelFamilyVerification
Ariston Microgenus 23 MFFIMicrogenusConfirmed · 2 sources
Ariston Microgenus MF27MicrogenusConfirmed · 2 sources
Ariston Microgenus 27MicrogenusConfirmed · 2 sources
Ariston Microgenus PlusMicrogenusConfirmed · 2 sources
Ariston Microsystem 10MicrosystemConfirmed · 2 sources
Ariston Microsystem 15MicrosystemConfirmed · 2 sources
Ariston Microsystem 21MicrosystemConfirmed · 2 sources
Ariston Microsystem 28MicrosystemConfirmed · 2 sources
Ariston Mini 23MiniConfirmed · 2 sources
Ariston Mini 27MiniConfirmed · 2 sources
Ariston Modula 23ModulaConfirmed · 2 sources
Ariston Microtec 23 MFFIMicrotec / T2Confirmed · 2 sources
Ariston T2 23 MFFIMicrotec / T2Confirmed · 2 sources
Ariston T2/23Microtec / T2Confirmed · 2 sources
Ariston Next 23NextConfirmed · 2 sources
Ariston One 23UnoConfirmed · 2 sources
Ariston Trend 24TrendConfirmed · 2 sources
Ariston Uno 24OneConfirmed · 2 sources

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 65100695 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Locate the reference printed on the body of the pressure gauge you have installed: it should indicate 65100695.
  2. Check your boiler model on the nameplate and look for it in the list of compatible models on this page.
  3. Compare the connections and the body with the original part before installing.
  4. If you have any doubts, send us a photo of the screen printing via WhatsApp and we'll confirm it for you before you purchase.
Diagnosis

Symptoms and faults resolved by pressure gauge 65100695

The pressure gauge shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

The pressure gauge doesn't show anything, the needle stays at zero no matter what.

Cause: The internal mechanism has stopped responding to the circuit pressure, whether it is high or low.

Refill water using the filling key and observe if you notice the boiler gaining pressure even if the needle doesn't move; if so, the fault is in the pressure gauge.

The needle indicates an unusual pressure, either very high or very low, and stays fixed there.

Cause: The mechanism that moves the needle has deformed or become blocked with debris from the circuit.

Bleed a radiator to release air and check if the reading changes; if it remains exactly the same, the pressure gauge is not reflecting the actual pressure.

You have to refill water very often because the pressure gauge always shows low pressure.

Cause: If you really lose pressure frequently, there may be a leak in the circuit, and the pressure gauge might not be the source.

Before replacing it, check the radiators, bleeders, and the filling valve itself for moisture; if there's no leak and the pressure doesn't increase when refilling, suspect the pressure gauge.

You don't know if the boiler has enough pressure because the gauge is not clearly readable.

Cause: The glass or casing of the pressure gauge is damaged and does not allow the needle to be seen clearly.

First, confirm the exact model of your boiler on the compatibility list: this part has no visible brand in the photo and there are several similar versions.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for Ariston pressure gauge 65100695

OEM reference
65100695
Brand
Ariston
Type of part
Pressure gauges - Aquastats
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days
Before purchasing
  • The component manufacturer is not listed: there is no legible brand in the available photos.
  • The reference code for the component is not listed.
  • This unit does not have legible markings; check your part reference before ordering it.
Frequently Asked Questions

Frequently Asked Questions about Pressure Gauge 65100695

In which boilers is the pressure gauge with reference 65100695 installed?
In the Ecocombi 27 MFFI, Excalibur 80 and 100, Microgenus 23 and 27 MFFI, and Microsystem 10, 15, 21, and 28 RFFI boilers; check the exact model of your boiler before ordering it.
Is it known which manufacturer makes this pressure gauge for the Ecocombi and Microgenus?
It is not listed; the available photo is a rear or side view of the piece, without any visible branding or markings.
What does the photo of this pressure gauge with reference 65100695 show?
A rear or side view of the piece, without any silkscreen, brand, or readable code.
How do I know if this pressure gauge is the one installed on my Excalibur or my Microsystem?
Check the exact model of your boiler in the compatibility list of this datasheet before ordering the part; appearance alone is not enough because there is no visible brand.
Is this pressure gauge suitable for both the Excalibur 80 and the Excalibur 100?
Yes, both models are on the list of compatible boilers for this part.
Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model