Pressure Gauge Boiler Fagor (N60G002M4)
Cewal pressure gauge, made in Italy, for Fagor Ecomini FEB-24AR boilers and related models (CE-24E/1, FEB-24E/1, FEB-24EUK1N). Reference N60G002M4 confirmed by two external sources. The label shows the 2, 3, and 4 bar sections of the scale. It indicates the pressure of the heating circuit; it is replaced when it stops showing the actual pressure.
Spare parts related to Fagor FEB (Ecomini / Eco)
Fagor boilers compatible with reference N60G002M4
Manometer with reference N60G002M4. Six confirmed compatibilities with two independent sources: FEB-24AR/1B and FEB-24AR/1N. Verify the printed reference on your part before purchasing.
Compatibility confirmed
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FEB-24AR/1B | FEB (Ecomini / Eco) | Confirmed · 2 sources |
| Fagor FEB-24AR/1N | FEB (Ecomini / Eco) | Confirmed · 2 sources |
| Fagor FEB-24E/1B | FEB (Ecomini / Eco) | Confirmed · 2 sources |
| Fagor FEB-24E/1N | FEB (Ecomini / Eco) | Confirmed · 2 sources |
| Fagor CE-24E/1B | CE | Confirmed · 2 sources |
| Fagor CE-24E/1N | CE | Confirmed · 2 sources |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. N60G002M4 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Locate the reference printed on the body of the pressure gauge you have installed: it should indicate N60G002M4.
- Check your boiler model on the nameplate and look for it in the list of compatible models on this page.
- Compare the connections and the body with the original part before installing.
- If you have any doubts, send us a photo of the screen printing via WhatsApp and we'll confirm it for you before you purchase.
Symptoms and faults resolved by pressure gauge N60G002M4
The pressure gauge shows the pressure of the boiler circuit. These are the typical symptoms and what to do:
The needle of the pressure gauge does not move or gets stuck, not reflecting the actual pressure of the circuit.
Cause: The internal mechanism seizes up over the years and stops accommodating the pressure changes in the system.
Bleed a radiator and observe if the needle drops at the same time; if it stays still, the pressure gauge is not working.
The boiler pressure cannot be read because the gauge is broken or illegible.
Cause: The glass of the sphere cracks or becomes opaque with heat and the passage of time.
Check with direct light if you can at least see the needle move when opening the filling valve.
A drop or water stain appears at the base of the pressure gauge.
Cause: The connection fitting to the circuit loses its seal with the pressure and temperature cycles of the boiler.
Dry the area and tighten the fitting with a wrench, without forcing it; if the ring reappears shortly, the leak is from the pressure gauge.
The boiler gives a pressure warning that does not match what the pressure gauge indicates.
Cause: The electronic sensor of the boiler and the mechanical reading of the pressure gauge stop aligning when the latter fails.
Fill slowly and check if the warning disappears even if the needle moves little or not at all.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Fagor N60G002M4 pressure gauge datasheet
- OEM reference
- N60G002M4
- Brand
- Fagor
- Type of part
- Pressure gauges - Aquastats
- Units in stock
- 4 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer
- Cewal
label - Country of manufacture
- Italy
label - Visible pressure gauge
- Sections 2, 3, and 4 bar visible; 0 and 1 bar not visible due to the angle of the photo
label - Fagor reference
- N60G002M4
sources
- The code '11/10' printed next to the logo is in the format of a manufacturing date (month/year), not a product reference; it is not used to identify the part.
- Due to the angle of the photo, the 0 and 1 bar sections of the scale are not visible; only 2, 3, and 4 are confirmed.
- The manufacturer of the part is Cewal, not Fagor. Fagor is the brand of the boiler, not the component.