Hermann Micra 2 / Supermaster Thermomanometer Ref. H047006226
Pressure gauge for the boiler's water circuit. The dial shows a scale from 1 to 4 bar; the body has a small label with text that is illegible in the photos, so the manufacturer and code are not specified. It is replaced when it stops indicating pressure correctly or leaks from the fitting.
Spare parts related to Hermann Micra 2
Hermann boilers compatible with reference H047006226
Pressure gauge with reference H047006226. 21 confirmed compatibilities with two independent sources: Habitat 2 23 E and Habitat 2 24 SE. Verify the printed reference on your part before purchasing.
Compatibility confirmed
| Boiler model | Family | Verification |
|---|---|---|
| Hermann Habitat 2 23 E | Habitat 2 | Confirmed · 2 sources |
| Hermann Habitat 2 24 SE | Habitat 2 | Confirmed · 2 sources |
| Hermann Habitat 2 28 SE | Habitat 2 | Confirmed · 2 sources |
| Hermann Master Inox 24 SE | Master Inox | Confirmed · 2 sources |
| Hermann Master Inox 30 SE | Master Inox | Confirmed · 2 sources |
| Hermann Micra 2 23 E-R | Micra 2 | Confirmed · 2 sources |
| Hermann Micra 2 24 SE | Micra 2 | Confirmed · 2 sources |
| Hermann Micra 2 24 SE-R | Micra 2 | Confirmed · 2 sources |
| Hermann Micra 2 30 SE | Micra 2 | Confirmed · 2 sources |
| Hermann Supermaster 23 E | Supermaster | Confirmed · 2 sources |
| Hermann Supermaster 24 SE | Supermaster | Confirmed · 2 sources |
| Hermann Supermaster 28 E | Supermaster | Confirmed · 2 sources |
| Hermann Supermaster 30 SE | Supermaster | Confirmed · 2 sources |
| Hermann Supermaster Inox 23 E | Supermaster Inox | Confirmed · 2 sources |
| Hermann Supermaster Inox 24 SE | Supermaster Inox | Confirmed · 2 sources |
| Hermann Supermaster Inox 28 E | Supermaster Inox | Confirmed · 2 sources |
| Hermann Supermaster Inox 30 SE | Supermaster Inox | Confirmed · 2 sources |
| Hermann Supermicra 24 E-R | Supermicra | Confirmed · 2 sources |
| Hermann Supermicra 24 SE | Supermicra | Confirmed · 2 sources |
| Hermann Supermicra 24 SE-R | Supermicra | Confirmed · 2 sources |
| Hermann Supermicra 30 SE | Supermicra | Confirmed · 2 sources |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. H047006226 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Locate the reference printed on the body of the pressure gauge you have installed: it should indicate H047006226.
- Check your boiler model on the nameplate and look for it in the list of compatible models on this page.
- Compare the connections and the body with the original part before installing.
- If you have any doubts, send us a photo of the screen printing via WhatsApp and we'll confirm it for you before you purchase.
Symptoms and faults resolved by pressure gauge H047006226
The pressure gauge shows the pressure of the boiler circuit. These are the typical symptoms and what to do:
The pressure gauge stays at zero and doesn't respond no matter how much you fill the circuit.
Cause: The measurement mechanism is faulty and does not register the pressure even though the water enters normally.
Check with the filling key that water is indeed entering (you can notice the flow) before assuming the pressure gauge is broken.
The needle is stuck at a value and doesn't change no matter what I do with the filling valve.
Cause: The gear that moves the needle has seized internally and does not reflect the actual pressure changes.
Bleed a nearby radiator while monitoring the pressure gauge; if the pressure should drop and the needle doesn't move, it's the part.
Water is leaking right at the fitting where the pressure gauge connects to the boiler.
Cause: The sealing gasket of the connection has degraded over the years due to the pressure and temperature of the circuit.
Dry the area, tighten the fitting carefully, and observe for a few minutes; if it starts leaking again, the leak is from the pressure gauge.
The dial is not clear, it's fogged up or dirty, and it's difficult to read the pressure.
Cause: Moisture has gotten inside the glass or the dial has become dirty over time, without the mechanism necessarily being broken.
Clean the glass on the outside and check if the needle moves normally when bleeding; if the problem is only visual, assess it before replacing the part.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Hermann H047006226 pressure gauge
- OEM reference
- H047006226
- Brand
- Hermann
- Type of part
- Pressure gauges - Aquastats
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Visible pressure scale on the dial
- 1 to 4 bar
label
- The part has a label attached to the body, but the text is illegible even at full size in the photos; there is no manufacturer or code listed.
- The reference H047006226 is from the current store catalog; it has not been verified with the physical label or independent external sources.
- The range of compatible boilers is extensive (Habitat 2, Master Inox, Micra 2, Supermaster, Supermicra); make sure your exact model is on the list before purchasing.