Baxi Roca Neobit / Sara / Nora 24/24 Circulating Pump (ref. 122070370)
RefurbishedBaxi RocaPumps

Baxi Roca Neobit / Sara / Nora 24/24 Circulating Pump (ref. 122070370)

60 €VAT includedIn stock · 1 unit

Circulator pump for Baxi Roca Neobit, Nora, and Sara 24/24F boilers. It drives the water in the heating and domestic hot water circuit. The manufacturer and part code have not been identified: the available photos only show the hydraulic body and the impeller, with no visible plate. Plate data: 230V, 50Hz, 52W, 0.23A, capacitor 1.7 µF, IP44, insulation class H, maximum pressure 6 bar.

Spare parts related to Baxi Roca SARA

Compatibility

Baxi Roca boilers compatible with reference 122070370

Circulating pump with reference 122070370. Seven confirmed compatibilities with two independent sources: Neobit 24/24F and Sara 24/24F. Verify the printed reference on your part before purchasing.

Compatibility confirmed

Boiler modelFamilyVerification
Baxi Roca Neobit 24/24FNEOBITConfirmed · 2 sources
Baxi Roca Sara 24/24FSARAConfirmed · 2 sources
Baxi Roca Sara 24/24 S/PSARAConfirmed · 2 sources
Baxi Roca Sara 24/24 TSARAConfirmed · 2 sources
Baxi Roca Nora 24/24FNORAConfirmed · 2 sources
Baxi Roca Nora 24/24NORAConfirmed · 2 sources
Baxi Roca Nora 28/28 FNORAConfirmed · 2 sources

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 122070370 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Locate the reference printed on the body of the circulating pump you have installed: it should indicate 122070370.
  2. Check your boiler model on the nameplate and look for it in the list of compatible models on this page.
  3. Compare the connections and the body with the original part before installing.
  4. If you have any doubts, send us a photo of the screen printing via WhatsApp and we'll confirm it for you before you purchase.
Diagnosis

Symptoms and faults resolved by circulator pump 122070370

The circulating pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

There is no circulation and the radiators are not heating, even though the boiler seems to ignite properly.

Cause: The rotor does not spin or spins very little, and the domestic hot water does not get distributed through the circuit.

Touch the pump body with the boiler running: if you don't feel any vibration, it's probably not spinning.

There is a humming or noise in the boiler that seems to come from the pump.

Cause: The motor may be straining against a rotor that doesn't spin freely, or there is air in the chamber.

Bleed the air from the circuit before replacing the pump, especially if the system has been refilled recently.

Water is leaking from the pump shaft.

Cause: The mechanical seal wears out over the years and gradually allows water to pass through.

Dry the area and check after a while of operation if the drop comes right from the shaft.

The pump gets stuck after the summer shutdown and does not start when the heating is used again.

Cause: Lime and prolonged inactivity can seize the rotor when it hasn't turned for months.

Before replacing it, try to manually unlock the shaft using the front screw, with the boiler cold and unplugged.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for Baxi Roca circulator pump 122070370

OEM reference
122070370
Brand
Baxi Roca
Type of part
Pumps
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Nominal voltage
230V
label
Frequency
50Hz
label
Current
0.23 A
label
Power
52 W
label
Condenser
1.7 µF
label
Maximum pressure
6 bar
label
Degree of protection
IP 44
label
Insulation class
H
label
Before purchasing
  • The manufacturer and code of this part are not listed: the available photos do not show a data plate, only the hydraulic body. Check the reference of your pump before ordering.
Frequently Asked Questions

Frequently Asked Questions about Circulator Pump 122070370

Is this pump with reference 122070370 suitable for a Baxi Roca Nora 24/24F?
Yes, the Nora 24/24F is on the list of boilers compatible with this pump.
Is it known which manufacturer makes the pump for the Baxi Roca Neobit 24/24F?
The actual manufacturer of the part is not listed; the available photos only show the hydraulic body and the impeller, with no visible plate.
What power and voltage does the pump of the Baxi Roca Sara 24/24F have?
230V, 50Hz, 52W, and 0.23A, according to the data collected from the plate.
How do I check if this pump is the one installed in my Baxi Roca Neobit 24/24F?
The part does not have a visible code to verify it by itself; compare the model of your boiler with the list of compatible ones.
What is the maximum pressure that the pump of the Baxi Roca Nora 24/24F can withstand?
6 bar, according to the data on the PCB.
What capacitor does the pump of the Baxi Roca Sara 24/24F use?
1.7 µF, according to the data collected from the PCB.
Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model