Filling Key Saunier Duval ThemaClassic F 25 E - Ref. S1007000

Saunier Duval boilers compatible with reference S1007000

Filling key with reference S1007000. 23 verified compatibilities: C24E and C25E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S1007000 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S1007000. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the filling valve S1007000 resolves.

The filling valve allows water to refill the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  I can't regain pressure in the heating circuit even though I open the valve.

  Cause: If the internal passage of the valve is blocked or the mechanism does not open completely, the mains water does not reach the circuit.

  Check that there is available mains water pressure at the boiler inlet and that the main shut-off valve of the house is open.

• 02

  Water is coming out of the body of the tap, not from the surrounding pipes.

  Cause: The wear of the internal sealing gaskets causes water to leak through the body of the part itself.

  Dry the area and locate the exact point of the drip: if it originates close to the body of the valve and not at a nearby thread, it points to the valve itself.

• 03

  I close the valve and after a while it keeps dripping little by little.

  Cause: A worn closing mechanism does not seal completely, even though it may feel properly closed to the touch.

  Mark the exact closing position of the control with a marker and check after a while if it has turned by itself or if it remains the same with dripping.

• 04

  When opening the valve to refill, a weak or irregular flow is noticeable.

  Cause: A partially obstructed internal mechanism allows less flow than normal, even though the valve opens without apparent issue.

  Compare the flow rate with what you remember from previous times and check that the main shut-off valve of the installation is fully open.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the filling key Saunier Duval S1007000

Catalogue reference

S1007000

Brand

Saunier Duval

Type of part

Filling valves

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval ThemaClassic F25E Manual (PDF)Document © Saunier Duval, provided as a technical reference.