Saunier Duval ThemaClassic F25E PCB - Cod. 0310144400L12

Saunier Duval boilers compatible with reference S10470

PCB with reference S10470. 33 verified compatibilities: F 25 E and F 24 E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S10470 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S10470. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB S10470

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler does not start and no pilot light is lit on the panel.

  Cause: The PCB has a protection fuse (T630mA/250V); if it blows, it cuts off all power even if the rest of the circuit is fine.

  Visually check the fuse before purchasing the PCB: if it is blown, sometimes it is enough to replace it.

• 02

  A relay click is heard, but the boiler does not respond to the heating or domestic hot water command.

  Cause: The PCB has two OMRON G5Q-1 relays that switch the ignition; if one fails, the command does not reach the component that should be activated.

  Check if the clicking sound corresponds to the circuit that is failing (heating or domestic hot water) to narrow down the diagnosis.

• 03

  An error code appears on the display that does not change even after resetting the boiler.

  Cause: The printed circuit board of this PCB manages all the sensors; an internal fault remains fixed until the board is replaced.

  Note the exact code: in the ThemaClassic and Thema ranges, there are codes that indicate sensor or pressure switch, not the PCB.

• 04

  The boiler operates intermittently, stopping and starting on its own without any apparent reason.

  Cause: A relay or a circuit component degraded by use may fail sporadically before completely breaking down.

  Note when it occurs (cold start, after several hours of use) before replacing the PCB.

Fault codes Saunier Duval that require diagnosis

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval S10470 PCB.

Catalogue reference

S10470

Uniclima internal SKU

CETF25E

Brand

Saunier Duval

Type of part

PCBs (control boards)

Units in stock

22 pcs

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

PCB name (silkscreened)

SYMSI7.0

Silkscreened code on the PCB

0310144400L12

Label / batch code (with barcode)

4000140782 111-3872 / SFL 05/28 IND 6 S006D

Protection fuse

T630mA / 250V

Relays

OMRON G5Q-1 DC24V and G5Q-1A DC24V, contacts 5A 30VDC / 10A 250VAC (two units, made in China)