Saunier Duval ThemaClassic PCB Ref. S10470

Saunier Duval boilers compatible with reference S10470

PCB with reference S10470. 33 verified compatibilities: F 25 E and F 24 E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S10470 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S10470. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the PCB S10470 resolves

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler does not turn on, neither the display nor any indicator lights, as if it is not receiving power.

  Cause: The power supply stage of the PCB may have failed and is not distributing voltage to the rest of the components.

  Check the fuse on the PCB, the thermal switch of the installation, and verify that power is reaching the boiler.

• 02

  The display shows a different fault code each time, or the same warning appears and disappears on its own.

  Cause: The microprocessor on the PCB misinterprets the sensor signals or intermittently loses the reading.

  Note the exact code and check that the connectors of the sensors are properly fitted before replacing the PCB.

• 03

  You can hear the relays on the PCB clicking, but neither the pump nor the fan starts.

  Cause: The output relays on the PCB may be stuck or burnt and are not closing the circuit to those components.

  Measure with a multimeter if there is output current to the pump or fan connector when the PCB gives the command.

• 04

  The home's control or thermostat is unable to communicate with the boiler and appears as disconnected.

  Cause: The communication bus that manages the PCB may have stopped responding.

  Check or replace the bus cable and reset the remote control before declaring the PCB faulty.

Fault codes from Saunier Duval that this spare part resolves.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval S10470 PCB.

Catalogue reference

S10470

Brand

Saunier Duval

Type of part

PCBs (control boards)

Units in stock

0 units

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

voltage

24VAC

power

6A

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval S C 24 E Manual (PDF)Document © Saunier Duval, provided as a technical reference.