Saunier Duval Themafast C 30E PCB

Saunier Duval boilers compatible with reference S10470

PCB with reference S10470. 33 verified compatibilities: F 25 E and F 24 E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S10470 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S10470. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB S10470

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler does not ignite: there is no display, no lights, and it does not attempt to start.

  Cause: If the PCB does not receive power, the other components do not work and there is no signal at all.

  Before changing the PCB, check the power supply and the boiler switch; make sure that power is reaching the input of the PCB.

• 02

  A new fuse blows immediately when installed, even though the electrical system is fine.

  Cause: A blown fuse again indicates a short circuit or a faulty component on the PCB, after the fuse.

  Do not change the fuse a third time without checking: if it blows immediately upon connection, the problem is with the PCB and not with the fuse.

• 03

  An error code appears that disappears after resetting, but returns after a few minutes.

  Cause: An intermittent fault in the PCB causes the system to temporarily recover and then fail again.

  Perform the reset two or three times, timing how long it takes to fail again; if the time decreases, the PCB is failing.

• 04

  The burner does not ignite even though there is a demand for heat and everything else (water, gas, pressure) is correct.

  Cause: If the PCB does not send the signal to the gas valve and the ignition, the burner cannot start.

  First, check that the gas valve is receiving power when it should ignite; if there is no signal from the PCB, that is the problem.

Fault codes Saunier Duval that require diagnosis

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval S10470 PCB.

Catalogue reference

S10470

Uniclima internal SKU

PETC30E

Brand

Saunier Duval

Type of part

PCBs (control boards)

Units in stock

2 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Silkscreen marking in the photograph

SYMSI7.0