Flow meter Saunier Duval Isofast F 30 E H MOD Ref. S5720200

Saunier Duval boilers compatible with reference S5720200

Flow meter with reference S5720200. 33 confirmed compatibilities: ThemaClassic C24E and ThemaClassic C25E.

Verified compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S5720200 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S5720200. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the flow meter S5720200

The flow meter detects the passage of water to activate the domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  You turn on the hot water tap and the boiler does not start to heat it, although it works fine for heating.

  Cause: The flow detector does not send the water flow signal to the control board, so it does not activate the DHW mode.

  Open the tap to the maximum for a moment; if it still doesn't ignite with high flow, the fault points to the detector rather than the PCB.

• 02

  The hot water heats up and cools down intermittently while you shower, without you having touched the faucet.

  Cause: The internal turbine gets stuck due to accumulated scale and sends an intermittent flow signal.

  Close and open the tap forcefully a couple of times to see if the turbine releases before changing the part.

• 03

  The boiler starts up for hot water without any tap being open in the house.

  Cause: The detector keeps indicating water flow even though there isn't any, due to the jammed turbine.

  Close all the hot water taps and check if it still starts; first rule out a real leak in the installation.

• 04

  A flow fault warning appears on the display every time you request hot water.

  Cause: The turbine does not spin enough to generate the minimum signal that the control board expects.

  Check the cold water inlet filter just before the sensor: if it is dirty, it reduces the flow rate and gives the same fault.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval S5720200 flow meter

Catalogue reference

S5720200

Uniclima internal SKU

CIF30EHMOD

Brand

Saunier Duval

Type of part

Flow detectors

Units in stock

6 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval Thematek S F24E Manual (PDF) Document © Saunier Duval, provided as a technical reference.