Saunier Duval Flow Meter Detector Thematek SF 24 E Ref. S5720200

Saunier Duval boilers compatible with reference S5720200

Flow meter with reference S5720200. 33 confirmed compatibilities: ThemaClassic C24E and ThemaClassic C25E.

Verified compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S5720200 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S5720200. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the flow meter S5720200

The flow meter detects the passage of water to activate the domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The hot water tap takes a while to respond, it comes out cold for a few seconds before heating up.

  Cause: The detector must register the flow before the PCB ignites the burner for domestic hot water.

  Check if the delay changes depending on how much you open the tap: if it varies with the flow rate, point to the detector before any other part.

• 02

  In the shower, the hot water suddenly cools down and then heats up again without you having touched the tap.

  Cause: An unstable flow signal causes the boiler to think that the water has stopped and turns off the burner even though it continues to flow.

  Open another hot water tap at the same time and check if the problem occurs again, to rule out a general pressure drop in the system.

• 03

  The water flow seems normal, but the boiler does not respond, as if it does not detect that water is passing through.

  Cause: If the internal paddle gets stuck due to scale or dirt, it won't rotate even though the water flows normally.

  Before changing it, bleed a little of the cold water circuit in case there are any remnants that may have settled in the sensor.

• 04

  The problem only occurs with domestic hot water; the heating works without issues.

  Cause: The flow detector operates only in the domestic hot water circuit and does not intervene in the heating circuit.

  Verify that the fault always occurs when requesting domestic hot water and never during heating before deciding on the replacement.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval S5720200 flow meter

Catalogue reference

S5720200

Uniclima internal SKU

DFTSF24E

Brand

Saunier Duval

Type of part

Flow detectors

Units in stock

3 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval Thematek S F24E Manual (PDF) Document © Saunier Duval, provided as a technical reference.