Flow meter Saunier Duval ThemaClassic F25E Ref. S5720200

Saunier Duval boilers compatible with reference S5720200

Flow meter with reference S5720200. 33 confirmed compatibilities: ThemaClassic C24E and ThemaClassic C25E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. S5720200 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference S5720200. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the flow meter S5720200 resolves.

The flow meter detects the passage of water to activate the domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler shows a flow error or lack of water on the display.

  Cause: The flow meter does not send the water flow signal to the electronics.

  Check the pressure with the manometer and bleed the circuit before changing the part.

• 02

  The burner does not start even though there is water and the pressure is correct.

  Cause: If the internal turbine does not spin, the sensor does not confirm the flow to the control board.

  Check if the turbine spins freely when gently forced before considering the part faulty.

• 03

  The fault is intermittent; sometimes it ignites and sometimes it does not.

  Cause: It could be due to scale or small particles that irregularly block the turbine.

  Check the cold water inlet filter and clean it before replacing the flow meter.

• 04

  The domestic hot water is not heating, but the heating is working fine.

  Cause: The flow meter specifically controls the domestic water circuit in these boilers.

  Confirm that the problem occurs in all taps in the house before blaming this part.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Saunier Duval S5720200 flow meter

Catalogue reference

S5720200

Brand

Saunier Duval

Type of part

Flow Detectors

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Code 1

00001035190

Code 2

18506100310

PCB code

V985-D

PCB code (2)

477

PCB code (3)

252298

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Saunier Duval ThemaClassic F25E Manual (PDF)Document © Saunier Duval, provided as a technical reference.