Bertelli & Partners Ferroli Fersystem Tech 25C PCB Ref. 39828240

Ferroli boilers compatible with reference 39828240

PCB with reference 39828240. Ten verified compatibilities: Fersystem Tech 10A and Fersystem Tech 18A.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 39828240 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 39828240. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the PCB 39828240

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler is not responding at all, neither the indicators nor the display, as if it had no power.

  Cause: The PCB controls the entire system; if it fails, the unit will not start even if it receives power.

  Before changing it, check the fuse on the PCB and make sure that the main switch and the differential are functioning properly.

• 02

  It locks with a fault code and the reset doesn't solve it, or it triggers again immediately.

  Cause: If the safety circuit of the PCB is damaged, it cannot maintain the correct state after the reset.

  Try the reset two or three times spaced out over time: if the fault reappears the same and quickly, suspect the PCB.

• 03

  The programmable thermostat indicates a heating demand, but the boiler does not turn on.

  Cause: The PCB receives that demand and activates the ignition; if the input circuit fails, the command is lost.

  Check the thermostat connection terminals on the PCB to ensure they are neither loose nor corroded before discarding it.

• 04

  The circulation pump does not start when the boiler should be heating.

  Cause: The PCB sends the electrical signal to the pump; if the relay fails, the pump is left without power.

  Measure with a tester if there is voltage reaching the pump at the moment it should activate, before changing the PCB.

Ferroli fault codes that require diagnosis

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Ferroli PCB data 39828240

Catalogue reference

39828240

Uniclima internal SKU

PLFE0091X

Brand

Ferroli

Type of part

PCBs (control boards)

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Component manufacturer

Bertelli & Partners

Component code

DBM14A

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Ferroli Fersystem Tech 25A Manual (PDF)Document © Ferroli, provided as a technical reference.