PCB Baxi Roca R20/20F Ref. 122122200

PCB Baxi Roca R20/20F Ref. 122122200

Stock · 2 units

The Baxi Roca R20/20F PCB is the central control component of this boiler. Its function is to manage the ignition, the modulation of the burner, the pump, and the safety features of the system. When it fails, the user will notice that the boiler does not start, gets locked, or exhibits erratic behavior. This part is compatible with boilers from the R series of Baxi Roca, such as the R 20 F, R 20 AF, and R 30/30 F models, among others. It is recommended to replace it if these symptoms occur.

VAT included

Compatibility

Baxi Roca boilers compatible with reference 122122200

PCB with reference 122122200. Seven confirmed compatibilities: R 20/20 F and R 20 F.

Proven compatibility

Boiler modelFamilyVerification
Baxi Roca R 20/20 FBaxi Roca R series (forced draught gas)Contrasted
Baxi Roca R 20 FBaxi Roca R series (forced draught gas)Contrasted
Baxi Roca R 20 AFBaxi Roca R series (forced draught gas)Contrasted
Baxi Roca R 20 AFIBaxi Roca R series (forced draught gas)Contrasted
Baxi Roca R 20/20 XFBaxi Roca R series (forced draught gas)Contrasted
Baxi Roca R 20/20 TBaxi Roca R series (forced draught gas)Contrasted
Baxi Roca R 30/30 FBaxi Roca R series (forced draught gas)Contrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 122122200 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 122122200. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 122122200 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    It doesn't start at all: neither heating nor domestic hot water, the boiler does nothing.

    Cause: If the power stage of the PCB fails, neither of the two functions can be activated because both depend on the same microprocessor.

    Check that the boiler has the correct water pressure and that the electrical supply is uninterrupted up to the PCB terminal block.

  • 02

    The boiler responds to the hot water tap but not to the heating demand, or vice versa.

    Cause: Each demand is output through a different port on the PCB; if only one function fails, that specific stage is usually damaged.

    Confirm that the fault always occurs in the same function before replacing the entire PCB: sometimes it's the three-way valve or the thermostat, not the PCB.

  • 03

    The pilot light on the PCB is on, but the boiler does not respond to anything.

    Cause: Having power does not guarantee that the microprocessor is processing the signals from the sensors; it can freeze with the light on but without activity.

    Try disconnecting and reconnecting the main power supply for a couple of minutes before replacing the PCB.

  • 04

    There is a slight burning smell near the control panel.

    Cause: An overheated component or a short circuit on the PCB can leave that characteristic smell before it completely fails.

    Turn off the boiler for safety and visually inspect if there is any darkened or swollen area on the PCB before handling anything.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Baxi Roca PCB 122122200

Catalogue reference
122122200
Brand
Baxi Roca
Type of part
PCBs (control boards)
Units in stock
2 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the PCB 122122200

Who manufactures the PCB Ref. 122122200 for the Baxi Roca R20/20F?
The Baxi Roca logo is printed on the left edge of the PCB, according to the silkscreen.
Is the PCB Ref. 122122200 suitable for a Baxi Roca R30/30F?
Yes, the R30/30F is among the compatible models listed for this PCB.
Is it the same PCB for the R20 AF and the R20F?
Yes, both models are included in the list of boilers compatible with reference 122122200.

Spare parts related to Baxi Roca Roca R series (forced draft gas)

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
PCB Baxi Roca R20/20F Ref. 122122200