Alfa Laval Plate Heat Exchanger - Fagor FEE 26 MA - Ref. MU0888400
The Alfa Laval - Fagor FEE 26 MA heat exchanger - Ref. MU0888400 is a component that transfers heat from the primary circuit to the domestic hot water instantly. When it fails, the water may come out lukewarm or with fluctuating temperatures, in addition to reducing the flow of domestic hot water. This model is compatible with Fagor boilers from the FEE MA range, such as the FEE 24 MA-1 B and FEE 27 MA-1 N, among others. A technician must confirm through diagnosis whether it needs to be replaced if you notice a decrease in water temperature or unstable flow.
- Type of part
- Plate heat exchanger
- Status
- Refurbished
- Catalogue reference
- MU0888400
- Warranty
- 1 year
Fagor boilers compatible with reference MU0888400
Plate heat exchanger with reference MU0888400. 19 verified compatibilities: FE 24 EMA-1 B and FE 24 EMA-1 N.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FE 24 EMA-1 B | Fagor FE EMA (instantaneous sealed) | Contrasted |
| Fagor FE 24 EMA-1 N | Fagor FE EMA (instantaneous sealed) | Contrasted |
| Fagor FE 27 EMA-1 B | Fagor FE EMA (instantaneous sealed) | Contrasted |
| Fagor FE 27 EMA-1 N | Fagor FE EMA (instantaneous sealed) | Contrasted |
| Fagor FE 35 EMA-1 LPG | Fagor FE EMA (instantaneous sealed) | Contrasted |
| Fagor FE 35 EMA-1 N | Fagor FE EMA (instantaneous sealed) | Contrasted |
| Fagor FEE 24 MA-1 B | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 24 MA-1 N | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 26 MA-1 B | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 26 MA-1 N | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 27 MA-1 B | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 27 MA-1 N | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 35 MA UK-1 N | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 35 MA-1 LPG | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 35 MA-1 N | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 40 MA-1 LPG | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 40 MA-1 N | Fagor FEE MA (Super Compact) | Contrasted |
| Fagor FEE 35 PLAT-1 LPG | Fagor FEE PLAT | Contrasted |
| Fagor FEE 35 PLAT-1 N | Fagor FEE PLAT | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the part number MU0888400 is the one for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference MU0888400. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the plate heat exchanger MU0888400
The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
Less hot water than usual is coming out, or it is lukewarm.
Cause: The heat exchanger plates do not transfer enough heat due to limescale buildup.
Check the water hardness and verify if the boiler has been descaled before replacing the part.
- 02
Water or moisture is visible in the area where the heat exchanger is installed.
Cause: A gasket or the weld between plates has lost tightness.
Locate the exact point of the leak with the boiler on; it could be a fitting and not the part itself.
- 03
The primary circuit is gradually losing pressure without any visible leak outside.
Cause: An internal perforation of the heat exchanger allows water to pass from one circuit to another.
Watch if the circuit pressure rises just when requesting domestic hot water; it is the signal of internal mixing.
- 04
A boiling or crackling noise can be heard when the boiler heats water.
Cause: The accumulated scale on the plates causes local overheating of the water.
Bleed the circuit and check the scale condition of the installation before declaring the part faulty.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Plate heat exchanger data sheet Fagor MU0888400
- Catalogue reference
- MU0888400
- Uniclima internal SKU
- IPFEE26MA
- Brand
- Fagor
- Type of part
- Plate heat exchanger
- Units in stock
- 3 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Type (Alfa Laval)
- BP1030
- Order number (Ord No)
- C94000001
- Customer Part No
- N80000010
- The reference Fagor MU0888400 and the type Alfa Laval BP1030 correspond to the same part; they are not different parts.
Frequently asked questions about the plate heat exchanger MU0888400
Does the plate heat exchanger Ref. MU0888400 fit the Fagor FEE26MA boiler?
Is the BP1030 type from Alfa Laval and the MU0888400 reference from Fagor the same part?
What fault requires changing the heat exchanger of the Fagor FEE26MA?
How do I check if this heat exchanger is the same as the one in my Fagor FEE26MA?
Does this same part also fit the Fagor JLG24-EBN boiler?
