Cewal Pressure Gauge for Fagor Ecomini FEB-24AR Boiler Ref. N60G002M4

Fagor boilers compatible with reference N60G002M4

Pressure gauge with reference N60G002M4. Six confirmed compatibilities: FEB-24AR/1B and FEB-24AR/1N.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. N60G002M4 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference N60G002M4. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the manometer N60G002M4

The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The needle of the pressure gauge does not move or gets stuck, not reflecting the actual pressure of the circuit.

  Cause: The internal mechanism seizes up over the years and stops accommodating the pressure changes in the system.

  Bleed a radiator and observe if the needle drops at the same time; if it stays still, the pressure gauge is not working.

• 02

  The boiler pressure cannot be read because the gauge is broken or illegible.

  Cause: The glass of the sphere cracks or becomes opaque with heat and the passage of time.

  Look under direct light to see if the needle movement is noticeable when opening the filling valve.

• 03

  A drop or water stain appears at the base of the pressure gauge.

  Cause: The connection fitting to the circuit loses its seal with the pressure and temperature cycles of the boiler.

  Dry the area and tighten the fitting with a wrench, without forcing it; if the ring reappears shortly, the leak is from the pressure gauge.

• 04

  The boiler gives a pressure warning that does not match what the pressure gauge indicates.

  Cause: The electronic sensor of the boiler and the mechanical reading of the pressure gauge stop aligning when the latter fails.

  Fill slowly and check if the warning disappears even if the needle moves little or not at all.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Fagor N60G002M4 pressure gauge datasheet

Catalogue reference

N60G002M4

Uniclima internal SKU

MPCFEFEB24

Brand

Fagor

Type of part

Pressure gauges & aquastats

Units in stock

6 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Manufacturer

Cewal

Country of manufacture

Italy

Visible pressure gauge

Sections 2, 3, and 4 bar visible; 0 and 1 bar not visible due to the angle of the photo

Fagor reference

N60G002M4