Fagor Extractor CE24E1N Fime
Refurbished Fagor Extractor fans FIME

Fagor Extractor CE24E1N Fime

The Fagor CE24E1N Fime extractor is a flue fan responsible for evacuating combustion gases and generating the necessary draft for the boiler to start. When it fails, the boiler may not ignite or may lock out due to a problem with flue gas evacuation, which could result in fault code F-2. This extractor is compatible with several boiler models, including the Fagor FE24E, FE24E1N, and FEB24AR, among others. A technician must confirm through diagnosis whether replacement is necessary when these symptoms occur or a fault in the ventilation system is indicated.

Type of part
Extractor fans
Status
Refurbished
Catalogue reference
AS0013067
Warranty
1 year
VAT included Stock · 6 units
Compatibility

Fagor boilers compatible with reference AS0013067

Extractor with reference AS0013067. Four confirmed compatibilities: FE24E and FE24E1N.

Proven compatibility

Boiler modelFamilyVerification
Fagor FE24EFagor FE / FEB / CE 24 (24 kW sealed atmospheric)Contrasted
Fagor FE24E1NFagor FE / FEB / CE 24 (24 kW sealed atmospheric)Contrasted
Fagor FE24NOXFagor FE / FEB / CE 24 (24 kW sealed atmospheric)Contrasted
Fagor FEB24ARFagor FE / FEB / CE 24 (24 kW sealed atmospheric)Contrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. AS0013067 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference AS0013067. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the extractor AS0013067

The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The extractor does not start or is delayed for several seconds before starting.

    Cause: The motor, due to wear, requires more effort to start and sometimes it fails to do so.

    Check if after a couple of ignition attempts the extractor eventually starts; that intermittent behavior indicates a possible issue with the motor.

  • 02

    Vibration or unusual noise that can be felt on the extractor itself.

    Cause: This is usually a sign of a worn bearing, where the shaft loses alignment and rubs against the casing.

    Turn the turbine by hand with the boiler unplugged and check for play or resistance before replacing the part.

  • 03

    The boiler is locking out indicating a fault with the air pressure switch.

    Cause: If the extractor does not reach the required flow rate, the pressure switch does not close the contact and the control board locks for safety.

    Before changing the extractor, check that the pipes going from the extractor to the pressure switch are not broken, bent, or have condensed water inside.

Fagor fault codes that require diagnosis

CodeFaultTechnical checks
F-2Air pressure switch does not detect air circulation (or fault in the pressure switch itself); the boiler locks out.Faulty extractor/fan or lack of flow does not generate the necessary depression and the pressure switch does not switch, triggering F-2; check power supply to the fan at start-up, free rotation/noise, and that the pressure switch changes state with the fan running.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Fagor AS0013067 extractor datasheet

Catalogue reference
AS0013067
Uniclima internal SKU
ECE24EN
Brand
Fagor
Type of part
Extractor fans
Units in stock
6 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Manufacturer
Fime
Frequently Asked Questions

Frequently asked questions about the extractor AS0013067

Does this extractor work for a Fagor FE24E1N boiler?
Yes, it is listed as compatible with FE24E1N, as well as CE24E1N, FE24NOX, and FEB24AR.
What fault requires changing the extractor of the Fagor CE24E1N?
It should be checked when the extractor does not start, makes excessive noise, or the boiler locks out due to a fault with the pressure switch. Replacement requires a technical diagnosis.
Is this Fime extractor compatible with the Fagor FEB24AR?
Yes, FEB24AR is among the compatible boilers listed for this part.
What is the reference for the Fagor CE24E1N extractor?
ECE24EN is Uniclima’s internal SKU for locating this listing. To confirm compatibility, check the manufacturer’s reference and the exact appliance model.
How many models are compatible with the extractor Fagor CE24E1N?
A total of 4 models are compatible.
What fault code is documented for this extractor?
The documented fault code is F-2.

Spare parts related to Fagor Fagor FE / FEB / CE 24 (24 kW sealed atmospheric)

Entrega calculada por destino Delivery time shown at checkout
1-year warranty reviewed and tested
14-day return uninstalled parts
Technical support we verify your model
Fagor Extractor CE24E1N Fime