Fagor FE-24 NOx Boiler Extractor Fan (CE24E1N, FE24E1N, FEB24E1N)
The extractor fan of the Fagor FE-24 NOX boiler evacuates combustion gases and generates the necessary draft for the boiler to start. When this part fails, the boiler may not ignite or may lock out, displaying the fault code F-2, which indicates that the air pressure switch does not detect air circulation. This fan is compatible with several models from the Fagor FE, FEB, and CE 24 range, including the FE24E, FE24E1N, and FE24NOX. It is recommended to replace the extractor fan when ignition or lockout issues occur due to a failure in smoke evacuation.
VAT included
Consult via WhatsAppFagor boilers compatible with reference AS0013067
Extractor with reference AS0013067. Four confirmed compatibilities: FE24E and FE24E1N.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FE24E | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FE24E1N | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FE24NOX | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FEB24AR | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. AS0013067 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference AS0013067. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the extractor AS0013067 resolves.
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The extractor does not start or has difficulty starting when the boiler is turned on.
Cause: The motor may have a seized shaft after a period of inactivity or the bearing may be worn out.
Unplug the boiler and try to turn the turbine by hand to see if it is stuck or turns with difficulty.
- 02
Abnormal noise or vibration in the extractor while it is operating
Cause: The blades may be unbalanced due to accumulated dirt or the bearing may have play.
Check for dust or scale on the turbine blades before replacing the entire extractor.
- 03
The boiler is blocked or does not ignite due to a flue or fan fault on the display.
Cause: The pressure switch connected to the extractor does not detect the minimum depression if the motor does not reach its operating speed.
Check that the air pressure switch tubes are not blocked, bent, or disconnected before replacing the fan.
- 04
The extractor stops by itself while the boiler is running.
Cause: An engine that overheats or loses power may stop halfway through the cycle.
Check if the extractor is hot to the touch right after it stops; that points more to a forced motor than to an electronic fault.
Fault codes for Fagor that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F-2 | Air pressure switch does not detect air circulation (or fault in the pressure switch itself); the boiler locks out. | Faulty extractor/fan or lack of flow does not generate the necessary depression and the pressure switch does not switch, triggering F-2; check power supply to the fan at start-up, free rotation/noise, and that the pressure switch changes state with the fan running. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Fagor AS0013067 extractor datasheet
- Catalogue reference
- AS0013067
- Brand
- Fagor
- Type of part
- Extractor fans
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Voltage
- 230V
- Frequency
- 50Hz
- Power
- 44W
Frequently asked questions about the extractor AS0013067
Is this extractor suitable for a Fagor CE24E1N in addition to the FE-24 NOX?
What power and voltage does this extractor fan of the FE-24 NOX have?
When should this extractor fan be replaced in a FE24E1N?
Spare parts related to Fagor Fagor FE / FEB / CE 24 (24 kW sealed atmospheric)
