FIME Smoke Extractor Fan Fagor Ecomini FEB 24 AR Ref. AS0013067
FIME smoke extractor, model GR01480P, motor code CZ5X0013/22, for Fagor Ecomini FEB 24 AR boilers and similar models in the range. Motor with insulation class CL H, manufactured on the marked date 22/11/10. It expels the combustion gases from the boiler. It is replaced when it makes excessive noise, vibrates, or rotates slower than normal.
VAT included
Consult via WhatsAppFagor boilers compatible with reference AS0013067
Extractor with reference AS0013067. Four confirmed compatibilities: FE24E and FE24E1N.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FE24E | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FE24E1N | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FE24NOX | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FEB24AR | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. AS0013067 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference AS0013067. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the extractor AS0013067 resolves.
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The extractor makes noise or vibrates loudly as soon as the boiler starts.
Cause: The turbine may have accumulated dirt that causes it to become unbalanced, or the bearing may be starting to fail.
Check if the noise changes when gently touching the casing of the extractor with the boiler off; a loose part can be noticed before replacing the motor.
- 02
The extractor spins slower and slower or stops by itself during operation.
Cause: It is typical of a motor that loses revolutions due to internal wear or a degraded start capacitor.
Observe if it takes longer to gain speed than before or if it stops and restarts on its own; that pattern is characteristic of the extractor.
- 03
The extractor does not start and the boiler gets locked when trying to ignite.
Cause: The motor does not reach the minimum revolutions required by the control board to authorize the gas flow.
With the boiler unplugged, turn the turbine by hand: if it is stuck or does not turn freely, it is a clear indication.
- 04
The boiler displays a fan or extractor error on the screen.
Cause: The control board detects that the extractor does not reach the expected speed and blocks the ignition for safety reasons.
Check that the turbine is not rubbing against the volute and that there is no play in the shaft before replacing the complete part.
Fault codes for Fagor that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F-2 | Air pressure switch does not detect air circulation (or fault in the pressure switch itself); the boiler locks out. | Faulty extractor/fan or lack of flow does not generate the necessary depression and the pressure switch does not switch, triggering F-2; check power supply to the fan at start-up, free rotation/noise, and that the pressure switch changes state with the fan running. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Fagor AS0013067 extractor datasheet
- Catalogue reference
- AS0013067
- Brand
- Fagor
- Type of part
- Extractor fans
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer
- FIME
- Model (housing)
- GR01480P
- Engine code
- CZ5X0013/22
- Insulation class
- CL H
- Manufacturing date marked
- 22/11/10
Frequently asked questions about the extractor AS0013067
Is the FIME Fagor Ecomini FEB 24 AR smoke extractor fan Ref. AS0013067 compatible with my Fagor Ecomini FEB 24 AR boiler?
Which boiler models are compatible with the extractor FIME Ref. AS0013067?
Who manufactures the smoke extraction fan Ref. AS0013067?
What type of insulation does the motor of the extractor FIME GR01480P have?
When should I consider replacing the fan of my Fagor Ecomini FEB 24 AR boiler?
What fault code is documented for the extractor FIME Ref. AS0013067?
Spare parts related to Fagor Fagor FE / FEB / CE 24 (24 kW sealed atmospheric)
