Boiler Fan Domitop F30E - Ref. 39819310
The Domitop F30E Boiler Extractor - Ref. 39819310 is a flue fan designed to expel combustion gases and generate the necessary draft for the boiler to start. If this extractor fails, the boiler may not ignite or may lock out due to issues with flue gas evacuation. This component is compatible with models such as DOMINA F 30 E, DOMITOP H F 30 E, and FERELLA GOLD DGT F 30 MEL, among others. It is recommended to replace the extractor when symptoms of malfunction occur, such as the inability to ignite the boiler or frequent lockouts.
VAT included
Consult via WhatsAppFerroli boilers compatible with reference 39819310
Extractor with reference 39819310. Seven confirmed compatibilities: DOMINA F 30 E and DOMINA OASI F 30 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Ferroli DOMINA F 30 E | Domina | Contrasted |
| Ferroli DOMINA OASI F 30 E | Domina | Contrasted |
| Ferroli DOMITOP F 30 E | Domitop | Contrasted |
| Ferroli DOMITOP H F 30 E | Domitop | Contrasted |
| Ferroli DOMITOP DGT F 30 E | Domitop | Contrasted |
| Ferroli TANTAQUA NF 30/100 | Tantaqua | Contrasted |
| Ferroli FERELLA GOLD DGT F 30 MEL | Ferella Gold | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 39819310 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 39819310. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the extractor 39819310 resolves.
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
When requesting heat, the boiler does not start the fan and does not ignite.
Cause: The turbine motor is jammed or does not have the necessary power to move the rotor.
With the boiler turned off and unplugged, try turning the impeller by hand: if it doesn't turn smoothly, the motor is seized.
- 02
A loud noise or vibration is noticeable in the fan, sometimes with the boiler visibly shaking.
Cause: The aluminum impeller may be dirty or the motor bearings are worn out.
Check if the impeller has dust or grease accumulated on the blades: clean it before deciding to replace the part.
- 03
The boiler locks out or displays a fault code related to the fan or extractor.
Cause: The control board does not validate the extractor's rotation and cuts off the gas because it cannot confirm that the flue gases are being properly evacuated.
Before replacing the fan, check that the flue duct is not blocked, crushed, or with the external terminal covered.
- 04
The fan rotates but makes a dry or rubbing noise that increases over time.
Cause: It is a characteristic symptom of wear in the motor bearings of this type of extractor.
Listen to see if the noise persists even when turning the impeller by hand with the boiler off: if so, it confirms bearing wear.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Ferroli 39819310 extractor datasheet
- Catalogue reference
- 39819310
- Brand
- Ferroli
- Type of part
- Extractors
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Frequently asked questions about the extractor 39819310
What is the purpose of the extractor in the Domitop F30E boiler?
Is this extractor compatible with the Domina F 30 E boiler?
What are the compatible models with the extractor ECDF30E?
When should I consider replacing the boiler extractor?
What fault codes does the Domitop F30E boiler extractor have?
Spare parts related to Ferroli Domitop
