Boiler Extractor Domitop F24 E - Ref. 39805830
When you turn on the heating, the fan of the Domitop F24 E boiler - Ref. 39805830 activates to expel the combustion gases and allow the boiler to start. If this part fails, you will notice that the boiler does not ignite or gets locked, preventing its operation. This fan is compatible with models such as Domitop F24 E, Domina F24 E, and several others from the Domina, Domicompact, and Ferella ranges. A technician must confirm through diagnosis whether it needs to be replaced if you observe ignition or flue gas evacuation issues.
- Type of part
- Extractor fans
- Status
- Refurbished
- Catalogue reference
- 39805830
- Warranty
- 1 year
Cointra boilers compatible with reference 39805830
Extractor with reference 39805830. 14 verified compatibilities: Domitop F24 E and Domina F24 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Cointra Domitop F24 E | Domitop | Contrasted |
| Cointra Domina F24 E | Domina | Contrasted |
| Cointra Domina Igloo F24 E | Domina | Contrasted |
| Cointra Domina Insert F24 E | Domina | Contrasted |
| Cointra Domina Oasi F24 E | Domina | Contrasted |
| Cointra Domina Oasi F30 E | Domina | Contrasted |
| Cointra Domicompact F24 | Domicompact | Contrasted |
| Cointra Domicompact F30 | Domicompact | Contrasted |
| Cointra Ferella Boil F24 E | Ferella | Contrasted |
| Cointra Ferella Boil F30 E | Ferella | Contrasted |
| Cointra Ferella Box F24 Mel | Ferella | Contrasted |
| Cointra Ferella Free F24 Mel | Ferella | Contrasted |
| Cointra Ferella Gold F24 Mel | Ferella | Contrasted |
| Cointra Ferella Zip F24 | Ferella | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the ref. 39805830 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 39805830. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the extractor 39805830
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The extractor does not start and the boiler does not ignite.
Cause: The motor is stuck or does not have enough power to turn the turbine.
Unplug the boiler and turn the turbine by hand: if it is stiff or blocked, the motor is seized.
- 02
Excessive noise or vibration in the extractor during operation
Cause: Worn bearings or a dirty and unbalanced turbine generate that vibration.
Carefully clean the accessible blades of the turbine and check if the noise improves before replacing the part.
- 03
The boiler locks out or shows a fan or extractor fault code.
Cause: The control unit does not detect the correct rotation of the fan and cuts off the ignition for safety, as it cannot guarantee the evacuation of fumes.
Check that the flue gas outlet duct is not obstructed and that the external terminal is not blocked before considering that the turbine is functioning properly.
- 04
The extractor starts normally but stops suddenly after a few minutes.
Cause: This usually happens when the motor overheats due to faulty bearings and self-protects by stopping.
Check if the shutdown always occurs after the same operating time: a repetitive pattern indicates thermal protection of the motor.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Cointra extractor data sheet 39805830
- Catalogue reference
- 39805830
- Uniclima internal SKU
- ECCDF24E
- Brand
- Cointra
- Type of part
- Extractor fans
- Units in stock
- 3 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- voltage
- 230V
- frequency
- 50Hz
- power
- 2300
Frequently asked questions about the extractor 39805830
What is the purpose of the extractor of the Domina F24 E?
Is this extractor suitable for my Ferella Gold F24 MEL?
When should the extractor of the Domicompact F24/F30 be replaced?
