Fagor Contract Mini CE 30 E Extractor Ref. AS0013067
The Fagor Contract Mini CE 30 E extractor is a flue fan responsible for evacuating combustion gases and generating the necessary draft for the boiler to start. When this component fails, the boiler does not ignite or gets locked, potentially displaying the fault code F-2 due to a failure in detecting air circulation. This extractor is compatible with boilers from the Fagor FE / FEB / CE 24 range, such as the models FE24E, FE24E1N, and FEB24AR, among others. A technician must confirm through diagnosis whether it needs to be replaced when ignition problems or frequent lockouts occur.
- Type of part
- Extractor fans
- Status
- Refurbished
- Catalogue reference
- AS0013067
- Warranty
- 1 year
Fagor boilers compatible with reference AS0013067
Extractor with reference AS0013067. Four confirmed compatibilities: FE24E and FE24E1N.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FE24E | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FE24E1N | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FE24NOX | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
| Fagor FEB24AR | Fagor FE / FEB / CE 24 (24 kW sealed atmospheric) | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. AS0013067 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference AS0013067. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the extractor AS0013067
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not ignite and shows a fault related to the extractor or ventilation.
Cause: The control unit blocks the ignition of the burner if it does not receive the signal that the fan is rotating correctly.
Check if the fan starts when the boiler is turned on or if it remains stationary before replacing it.
- 02
The extractor starts but struggles to reach speed, as if it lacks power.
Cause: A worn motor or one with damaged bearings does not achieve the necessary rotation to generate the appropriate depression.
Unplug the boiler, manually turn the shaft of the fan, and check if you feel any abnormal resistance.
- 03
There is a louder than normal noise, like a buzzing or rubbing sound, when the boiler is on.
Cause: A worn or misaligned impeller can rub against the casing while rotating, causing that noise.
Visually check if the impeller is off-center or if there are rubbing marks on the casing.
- 04
The boiler intermittently locks out due to flue gas failure, sometimes it does and sometimes it doesn't.
Cause: A faulty extractor does not always lose flow in the same way, so the fault may not repeat with each attempt.
Before changing the part, check that the flue pipe is properly installed and free of obstructions, as it can cause the same symptom.
Fagor fault codes that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| F-2 | Air pressure switch does not detect air circulation (or fault in the pressure switch itself); the boiler locks out. | Faulty extractor/fan or lack of flow does not generate the necessary depression and the pressure switch does not switch, triggering F-2; check power supply to the fan at start-up, free rotation/noise, and that the pressure switch changes state with the fan running. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Fagor AS0013067 extractor datasheet
- Catalogue reference
- AS0013067
- Uniclima internal SKU
- ECMCE30E
- Brand
- Fagor
- Type of part
- Extractor fans
- Units in stock
- 7 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Complete screen printing
- RLE130234A00 A18- | 26X0LH.A5G P26 | 230V ~ 50Hz A250 | TMAX I CL.H CH.U.1
- Voltage
- 230V
- Frequency
- 50Hz
Frequently asked questions about the extractor AS0013067
What voltage does the Fagor Contract Mini CE 30 E extractor operate at?
Is this extractor compatible with the Fagor FE24E boiler?
Does this extractor work for the Fagor FEB24AR?
How many models are compatible with the Fagor Contract Mini CE 30 E extractor?
What fault code is documented for this extractor?
What is the reference for the Fagor Contract Mini CE 30 E extractor?
Spare parts related to Fagor Fagor FE / FEB / CE 24 (24 kW sealed atmospheric)
