FIME Fan for Fagor Boiler FE 24AE 1N
Refurbished Fagor Extractor fans FIME

FIME Fan for Fagor Boiler FE 24AE 1N

If your boiler does not ignite or gets blocked, a technical diagnosis must confirm if you need the FIME flue fan for the Fagor FE 24AE 1N boiler. This part is a flue fan responsible for evacuating combustion gases and creating the necessary draft for the boiler to start. It is compatible with models such as CE24E1N, FE24E1N, FE24NOX, and FEB24E1N, among others. A technician must confirm through diagnosis if it is necessary to replace the flue fan when issues arise in the evacuation of flue gases.

Type of part
Extractor fans
Status
Refurbished
internal SKU
ECFE24AE
Warranty
1 year
VAT included Stock · 7 units
Compatibility

Compatible Fagor boilers

Extractor. Four confirmed compatibilities: CE24E1N and FE24E1N.

Proven compatibility

Boiler modelFamilyVerification
Fagor CE24E1NCE24E1NContrasted
Fagor FE24E1NFE24E1NContrasted
Fagor FE24NOXFE24NOXContrasted
Fagor FEB24E1NFEB24E1NContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if it is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference —. If it is not visible, do not identify the part by its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the extractor

The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler turns off by itself a few seconds after starting, or it doesn't turn on at all.

    Cause: The extractor does not spin enough and the air pressure switch does not close, so the control board cuts off the gas to avoid risks.

    With the boiler off, turn the impeller by hand: if it is stiff or rubbing, the problem is with the fan rather than the pressure switch.

  • 02

    It smells burnt or like combustion gases near the boiler.

    Cause: The extractor works, but it does not expel with the necessary force to properly evacuate the fumes.

    Check the external outlet: a flue terminal blocked by nests, ice, or dirt can cause the same symptom even if the extractor is not broken.

  • 03

    The extractor makes a rubbing noise or a loud buzzing sound when starting up.

    Cause: The motor bearings are worn out or the impeller has become unbalanced with use.

    Gently touch the casing while it is operating: if it vibrates more than normal, it is advisable to check the impeller before purchasing a new part.

  • 04

    The boiler shows a fault code for the fan or extractor and does not reset.

    Cause: The control unit does not receive the correct rotation signal from the fan, usually because the motor does not reach the required minimum speed.

    Check the silicone tubes of the pressure switch: if they are loose, bent, or blocked, they can cause the same fault even if the extractor is not damaged.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Fagor extractor datasheet

Uniclima internal SKU
ECFE24AE
Brand
Fagor
Type of part
Extractor fans
Units in stock
7 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

manufacturer
FIME
Before purchasing
  • The current catalog does not list any reference for this part.
Frequently Asked Questions

Frequently asked questions about the extractor

Does the extractor of the Fagor FE 24AE 1N have the manufacturer FIME marked on the casing?
Yes, the name FIME is embossed on the metal casing, next to the outlet.
Is this FIME extractor suitable for a Fagor CE24E1N?
Yes, the Fagor CE24E1N is on the list of compatible boilers for this part.
Is this FIME extractor compatible with the Fagor FE24NOX?
Yes, the FE24NOX appears in the list of compatible boilers for this part.
When should the FIME extractor of the Fagor FE24E1N be replaced?
The technical diagnosis must confirm that it is necessary to replace it, even when the boiler does not properly vent the combustion gases or the fan fails.

Spare parts related to Fagor CE24E1N

Entrega calculada por destino Delivery time shown at checkout
1-year warranty reviewed and tested
14-day return uninstalled parts
Technical support we verify your model
FIME Fan for Fagor Boiler FE 24AE 1N