FIME Extractor Fan for Fagor Supercompact Boiler FEE 26MA N - Ref. GR03870
The Fagor Supercompact FEE 26MA N boiler includes the FIME extraction motor, reference GR03870. This part is responsible for expelling combustion gases and generating the necessary draft for the boiler to start. If it fails, you will notice that the boiler does not ignite or locks out due to a problem with the flue gas evacuation, displaying the fault code F2. It is compatible with models such as FEE-26MA and FEE-26MA N, among others. It is recommended to replace the extraction motor when it shows faults in operation or in gas evacuation.
VAT included
Consult via WhatsAppFagor boilers compatible with reference GR03870
Extractor with reference GR03870. Two confirmed compatibilities: FEE-26MA and FEE-26MA N.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FEE-26MA | Fagor Supercompact FEE | Contrasted |
| Fagor FEE-26MA N | Fagor Supercompact FEE | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. GR03870 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference GR03870. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the extractor GR03870 resolves.
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler tries to ignite, the fan can be heard starting, but it shuts down immediately and becomes locked.
Cause: The extractor does not reach the necessary speed for the pressure switch to allow ignition.
Before changing the fan, check if the impeller turns freely by hand with the boiler unplugged. If it is stuck, the problem is with the fan.
- 02
The boiler heats with difficulty or takes longer than usual to reach the temperature.
Cause: The extractor spins, but due to wear, it does not move enough air for complete combustion.
Check that the flue gas outlet duct is not partially obstructed before concluding that the extractor is the problem.
- 03
A strange beeping or whistling sound is coming from the area of the extractor.
Cause: It could be a worn bearing or the impeller rubbing against the casing due to wear.
With the boiler turned off, check if the motor shaft has lateral play by moving it with your fingers.
- 04
The extractor does not start at any time and the boiler shows a fault as soon as heat is requested.
Cause: There may be an internal fault in the winding or in the motor's start that prevents it from turning.
Check if there is power at the extractor connector before replacing it. This way, you can rule out a wiring or PCB issue.
Fault codes for Fagor that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F2 | The smoke is not being evacuated properly. | If the flue gas extraction fan (GR03870) does not start or does not move enough air, the air pressure switch does not detect circulation and the boiler shows fault code F2. Check that the motor is receiving power and that the fan spins properly when starting the ventilation. Also, verify that the pressure switch changes state correctly. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Fagor GR03870 extractor datasheet
- Catalogue reference
- GR03870
- Brand
- Fagor
- Type of part
- Extractor fans
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- manufacturer
- FIME
- component code (MOD)
- GR03870
Frequently asked questions about the extractor GR03870
Does the extractor motor GR03870 of the Fagor Supercompact FEE 26MA N come from FIME?
What is the reference code for the extractor motor of the Fagor Supercompact FEE 26MA N?
Is this motor GR03870 the one used in the Fagor Supercompact FEE 26MA N Fime?
Does the extractor motor GR03870 specify the voltage or power?
