FIME Fan Boiler Fagor FEC-11 TD B Ref. 810004434
Extractor from manufacturer FIME, identified on the label with serial code C.SER001922 CLH and a power of 3.5 W. It is marked CE. The part has a second label with codes FM6, ORD1490, 10-9011, and P4-000/56. It is compatible with Fagor boilers CE24E1N, FE24E1N, FEB24E1N, FEC-11 TD B, and FEC11TD. The replacement requires first confirming the fault of the part through technical diagnosis, even when the extractor does not start or the boiler locks out due to flue fault.
- Type of part
- Extractor fans
- Status
- Refurbished
- Catalogue reference
- 810004434
- Warranty
- 1 year
Fagor boilers compatible with reference 810004434
Extractor with reference 810004434. Five confirmed compatibilities: FE24E and FE24E1N.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FE24E | Fagor FE24 (Supercompact / Super Comfort 24 kW) | Contrasted |
| Fagor FE24E1N | Fagor FE24 (Supercompact / Super Comfort 24 kW) | Contrasted |
| Fagor FE-24 NOx | Fagor FE24 (Supercompact / Super Comfort 24 kW) | Contrasted |
| Fagor FEB24E1N | Fagor FEB24 | Contrasted |
| Fagor FEB-24 AR | Fagor FEB24 | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 810004434 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 810004434. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the extractor 810004434
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The extractor does not start when the power is turned on; it remains still.
Cause: The extractor motor may be seized or have lost starting power after being idle for a while.
Try to turn the turbine by hand with the boiler unplugged; if it is difficult or does not turn, the motor is seized.
- 02
The boiler locks with a flue fault as soon as it is turned on.
Cause: The air pressure switch does not receive the required depression if the fan does not operate at full speed.
Check the silicone tubes of the pressure switch and make sure they are properly connected before declaring the extractor faulty.
- 03
A metallic or rubbing noise is heard when turning the extractor.
Cause: The shaft or the bearings of the motor are worn out due to continuous use.
Turn the turbine by hand with the boiler off and check for any hard spots or irregular rubbing.
- 04
The extractor starts slowly or struggles to gain speed.
Cause: A motor that loses power takes time to reach the speed required by the pressure switch to validate the draft.
Observe how long it takes for the sound of the extractor to stabilize after starting; a slow start is a sign of a fatigued motor.
Fagor fault codes that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| F2 | Air pressure switch does not confirm circulation/draught at start-up (lockout due to flue gas evacuation). | If the extractor fan (810004434) does not rotate or does not provide flow, the depression is not generated and the pressure switch does not close; check power supply to the motor and rotation/RPM, and measure depression/pressure switch signal in the tubes with a U manometer or continuity at terminals during startup. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Fagor 810004434 extractor datasheet
- Catalogue reference
- 810004434
- Uniclima internal SKU
- ECF2301
- Brand
- Fagor
- Type of part
- Extractor fans
- Units in stock
- 3 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Manufacturer
- FIME
- Serial code
- C.SER001922 CLH
- Power
- 3.5 W
- Certification
- CE
- Secondary label
- FM6 / ORD1490 / 10-9011 / P4-000/56
Frequently asked questions about the extractor 810004434
Does this extractor FIME (Ref. 810004434) fit a Fagor FEC11TD?
What power does this FIME extractor have for the FEB24E1N?
What other codes are on the label of this extractor besides 810004434?
Does this extractor have CE marking for the CE24E1N?
