Zilmet Plate Heat Exchanger Boiler Fagor FEB 23E N Zilmet

Fagor boilers compatible with reference MU0886000

Plate heat exchanger with reference MU0886000. 11 verified compatibilities: CE 24 E and CE 30 E.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if the part number MU0886000 is the one for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference MU0886000. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the plate heat exchanger MU0886000

The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The domestic hot water comes out lukewarm or takes a long time to heat up.

  Cause: The plates accumulate scale inside and transmit less and less heat to the water flowing through the domestic hot water circuit.

  Before replacing it, try a chemical cleaning of the heat exchanger and check if the performance improves.

• 02

  A whistling or bubbling sound is noticeable when hot water runs through the boiler.

  Cause: The narrowed passage between obstructed plates creates turbulence in the water and produces that noise.

  Check if the noise decreases with lower flow, with the tap slightly open, before replacing the part: it helps to distinguish between obstruction and network pressure.

• 03

  Moisture or a small puddle appears under the boiler when using the domestic hot water.

  Cause: A crack between plates allows water to leak out of the heat exchanger body.

  Dry the area well, activate the domestic hot water, and locate if the dripping originates right at the block of PCBs and not at a nearby connection.

• 04

  The pressure in the heating circuit rises when a hot water tap is opened.

  Cause: A damaged PCB connects the heating circuit with the domestic hot water circuit inside the heat exchanger.

  Note the pressure on the manometer before and just after opening the domestic hot water tap to confirm if there is mixing between circuits.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Plate heat exchanger data sheet Fagor MU0886000

Catalogue reference

MU0886000

Uniclima internal SKU

IPCF2001

Brand

Fagor

Type of part

Plate heat exchanger

Units in stock

3 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

manufacturer

Zilmet

manufacturing origin

Made in Italy