Plate Heat Exchanger For Boiler FC-15 LPG - Ref. MU0501000
Plate heat exchanger mounted on the FC-15 GLP boiler, identified by the code MU0501000. In mixed boilers, this component transfers heat between the primary heating circuit and the domestic hot water circuit. Replacement requires first confirming the fault of the part through technical diagnosis, even when there is a loss of tightness, leaks between plates, or the production of DHW stops being constant.
- Type of part
- Plate heat exchanger
- Status
- Refurbished
- Catalogue reference
- MU0501000
- Warranty
- 1 year
Fagor boilers compatible with reference MU0501000
Plate heat exchanger with reference MU0501000. Two confirmed compatibilities: FEE 20 and FEE 20/1N.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FEE 20 | Fagor Ecocompact | Contrasted |
| Fagor FEE 20/1N | Fagor Ecocompact | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the reference MU0501000 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference MU0501000. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the plate heat exchanger MU0501000
The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The hot water comes out intermittently, cutting off and then returning, instead of remaining constant.
Cause: If the passage between plates is partially obstructed, the heat exchanger cannot maintain stable heat transfer and the temperature fluctuates.
Check the incoming water flow and make sure that the boiler filter is not dirty before attributing it to the heat exchanger.
- 02
You notice humidity or dripping in the area where the plate heat exchanger is installed.
Cause: A perforated plate or a worn gasket allows water to escape between the two circuits separated by the part.
Dry the area, turn on the boiler in domestic hot water mode, and observe for a few minutes to confirm the exact source of the leak.
- 03
The hot water is gradually becoming less hot or taking longer to heat up.
Cause: Limescale accumulates inside the plates and gradually reduces the effective heat exchange surface.
If the area has hard water and the boiler does not have a water softener, it is another indication of scaling before replacing the part.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Plate heat exchanger data sheet Fagor MU0501000
- Catalogue reference
- MU0501000
- Uniclima internal SKU
- IPEFEE20
- Brand
- Fagor
- Type of part
- Plate heat exchanger
- Units in stock
- 3 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Reference
- MU0501000
Frequently asked questions about the plate heat exchanger MU0501000
Does this heat exchanger MU0501000 work for the boiler FC-15 GLP?
What fault indicates that the heat exchanger of the FC-15 LPG needs to be replaced?
Spare parts related to Fagor Fagor Ecocompact
