Saunier Duval Thematek F24E Fime CAB1085 extractor fan
Smoke extractor manufactured by Fime, model code CAB1085, confirmed on the part's label. Fits Saunier Duval Thematek F24E and Renova Star F24 boilers. It evacuates combustion gases from the boiler; it is replaced when it fails to start, makes excessive noise, or the boiler locks due to an air pressure switch fault.
VAT included
Consult via WhatsAppSaunier Duval boilers compatible with reference S1009500
Extractor with reference S1009500. Three confirmed compatibilities: Thematek F24E and Thematek F24E-B.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval Thematek F24E | Thematek | Contrasted |
| Saunier Duval Thematek F24E-B | Thematek | Contrasted |
| Saunier Duval Thematek F24E-C | Thematek | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. S1009500 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference S1009500. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the extractor S1009500 resolves.
The extractor evacuates the combustion gases with forced draft. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The extractor does not start when the ignition is activated, or it takes longer than usual to start up.
Cause: The motor loses power with use and struggles to overcome the initial starting inertia.
Check if it starts on the second or third attempt when you power it on: that intermittent pattern indicates that the motor is starting to fail.
- 02
Strange noise or vibration in the extractor
Cause: It is a sign of a worn bearing: the shaft no longer rotates centered and rubs.
With the boiler unplugged, manually move the turbine and check for lateral play or if it is difficult to turn, before replacing the part.
- 03
The boiler is locking out due to a fault with the pressure switch.
Cause: If the extractor does not reach the required flow rate, the pressure switch does not close the contact and the control board locks.
Before changing the extractor, check that the silicone tubes of the pressure switch are not perforated, loose, or filled with condensation.
Fault codes from Saunier Duval that this spare part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F2 | Safety Flue Terminal (SFT) or pressure switch. | The flue extractor/fan does not start or does not provide sufficient flow, the air pressure switch does not switch, and the boiler enters SFT. Check voltage to the motor (≈230 V on demand), fan rotation/consumption, and that the pressure switch closes with the fan running. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Saunier Duval S1009500 fan datasheet
- Catalogue reference
- S1009500
- Brand
- Saunier Duval
- Type of part
- Extractor fans
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Manufacturer
- Fime
- Model code (manufacturer)
- CAB1085
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Saunier Duval Thematek F24E-C Manual (PDF)Document © Saunier Duval, provided as a technical reference.
Frequently asked questions about the extractor S1009500
Who manufactures the extractor of the Thematek F24E?
What is the manufacturer code for the extractor CAB1085?
Is this extractor compatible with other boiler models?
What symptoms indicate that the extractor needs to be replaced?
What fault code is documented for this product?
What is the reference of the extractor compatible with the Thematek F24E?
Spare parts related to Saunier Duval Thematek
