Chaffoteaux Calydra PCB Ref. 61010592
Chaffoteaux Calydra PCB (control board) Ref. 61010592 controls the ignition, burner modulation, pump, and safety features of the boiler. When it fails, the boiler may not start, become locked, or operate erratically, displaying fault code 30: Communication fault with the main board. It is compatible with models such as Calydra 23 FF, Calydra 28 FF, and MC FF, among others. It should be replaced when it shows operational faults or if the boiler exhibits signs of locking.
VAT included
Consult via WhatsAppChaffoteaux boilers compatible with reference 61010592
PCB with reference 61010592. Three confirmed compatibilities: Calydra 23 FF and Calydra 28 FF.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Chaffoteaux Calydra 23 FF | Calydra | Contrasted |
| Chaffoteaux Calydra 28 FF | Calydra | Contrasted |
| Chaffoteaux MC FF | MC | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 61010592 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 61010592. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB 61010592 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not turn on and there is no reaction on the display.
Cause: The PCB does not start its internal power supply even though 230V is reaching the terminal block.
Measure with a multimeter if 230V is reaching the connection terminal before replacing the PCB.
- 02
It locks with a different fault code each time, unrelated to water, gas, or evacuation.
Cause: The electronic control of the PCB manages all the signals of the boiler; if it fails, it can generate errors that point to healthy parts.
Note the codes of various ignitions: if they do not match the same component, the PCB is the main suspect.
- 03
The control or the thermostat lose communication with the boiler.
Cause: The PCB manages the communication bus with the external controls; if it fails, the link is lost.
Check the bus wiring and try to turn on the boiler from the panel itself before ruling out the PCB.
- 04
The relays can be heard activating, but the pump or the fan do not start moving.
Cause: The PCB gives the ignition command but does not deliver output voltage to the component.
Measure with the multimeter if there is voltage at the connector of the pump or the fan when they should be activated.
- 05
The boiler turns on and shuts off by itself after a few seconds, without a fixed fault code.
Cause: An unstable PCB loses control of the burner as soon as it starts, even if the rest of the components are working.
Check that the cut does not coincide with any knocks or vibrations on the boiler casing, which could indicate poor internal welding.
Fault codes Chaffoteaux that this part resolves
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 30 | Communication fault with the main PCB | The ignition/power PCB may fail or lose communication with the control panel/display. Check voltages on the PCB (230 Vac input and 5/12 Vdc auxiliary), grounds, and continuity/connectors of the display–PCB harness; if everything is correct and the issue persists, replace the PCB (Ref. 61010592). |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Chaffoteaux 61010592 PCB.
- Catalogue reference
- 61010592
- Brand
- Chaffoteaux
- Type of part
- PCBs (control boards)
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Terminal voltage
- 230V
Frequently asked questions about the PCB 61010592
Is this PCB Ref. 61010592 the same one manufactured by Myrra?
Does this PCB work for a Chaffoteaux Calydra 23 FF?
What voltage does the terminal block of this PCB work at in the boiler?
Is this PCB suitable for a Chaffoteaux MC FF?
How many models are compatible with the Chaffoteaux PCB Ref. 61010592?
What fault codes are documented for this PCB?
Spare parts related to Chaffoteaux Calydra
