Saunier Duval Themafast C25 E Interface Module/Display Ref. S1062200
The control PCB of the Saunier Duval interface/display module manages the ignition, burner modulation, pump, and safety features of the boiler. When it fails, the boiler may not start, become locked, or exhibit erratic behavior. This module is compatible with several models in the range, including, among others, the main PCB. It should be replaced when these symptoms occur or if the boiler does not respond adequately to operational commands.
VAT included
Consult via WhatsAppCompatible Saunier Duval boilers
PCB. A proven compatibility: main board.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval main PCB | the | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if it is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference —. If it is not visible, do not identify the part by its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB (control board) resolves
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The screen is blank or does not turn on, although the boiler is working.
Cause: The display module is not receiving power or has lost communication with the main PCB.
Make sure that the flat connector between the module and the main PCB is properly fitted and free of oxidation before replacing it.
- 02
The touch keyboard does not respond when touching the icons -, hand, or +.
Cause: The touch membrane of the module has worn out or lost sensitivity due to use and humidity.
Clean and dry the touch surface and check that there is no condensation before considering the part as faulty.
- 03
The screen flickers, shows random symbols, or turns off and on by itself.
Cause: A contact fault in the module or its connection causes intermittent signal cuts.
Cut the power to the boiler for one minute and reconnect it to rule out a temporary hang-up before replacing the part.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Saunier Duval PCB data sheet
- Brand
- Saunier Duval
- Type of part
- PCBs (control boards)
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Frequently asked questions about the PCB (control board)
Does this LCD screen module with a touch keyboard have a reference?
What icons does the keyboard of this LCD display module have?
When should this LCD screen module with touch keyboard be replaced?
