Honeywell Pressure Switch C6065F1100:2 - Baxi Roca Eco 240 FI

Baxi boilers compatible with reference 5137527

Pressure switch with reference 5137527. A proven compatibility: Eco 240 Fi.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 5137527 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 5137527. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the pressure switch 5137527

The pressure switch controls the air or water pressure to authorize operation. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler tries to ignite, stops after a few seconds, and needs to be reset to try again.

  Cause: The pressure switch does not close its contact within the working pressure, and the control unit interprets that there are no safe conditions to supply gas.

  Before replacing it, check that the connections of the pressure switch (tubes or wiring) are not loose or damaged.

• 02

  The fault appears mainly on windy days or when the boiler is cold, and at times it works normally.

  Cause: A pressure switch at the limit of its setting may switch correctly under favorable conditions and fail when the margin narrows.

  Keep a record of the conditions under which it fails; this helps differentiate a worn-out pressure switch from an installation problem.

• 03

  The boiler gets locked with a fault code related to pressure or evacuation.

  Cause: It is the typical signal that the pressure switch has not confirmed the safety condition that the control unit expects before ignition.

  Check the manual for the specific fault code given by the boiler and confirm with the installer if it points to this pressure switch before ordering it.

• 04

  When disassembling the pressure switch, the contact sounds loose or does not make a firm click when pressed by hand.

  Cause: The internal microswitch wears out with the cycles and stops providing a clean switch, even though the boiler pressure is correct.

  With the boiler unplugged, manually activate the pressure switch and check if the click is firm or hesitant.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Baxi 5137527 pressure switch datasheet

Catalogue reference

5137527

Uniclima internal SKU

PCBE240FI

Brand

Baxi

Type of part

Pressure switches

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Manufacturer

Honeywell (Yamatake Corporation)

Model code

C6065F1100:2

Set pressure

1.2 mbar

Maximum pressure

6 mbar

Contact

1.5(0.5)µ, 250V~

CE code

CE-0063AP3085/1

Microswitch code

V-5610R-041

Current/voltage of the microswitch

1.5A - 250VAC

Date/lot code

0128D

Additional code

Y170

Manufactured in

Japan