Compatible Circulating Pump Victoria 24/24 and Others - Ref. 7801354
If you notice that your radiators are cold or hear strange noises from the boiler, the circulating pump may be the cause of the problem. The compatible circulating pump Victoria 24/24, with reference 7801354 from Baxi Roca, is responsible for moving water through the heating circuit. When it fails, you may experience overheating or blockages due to lack of circulation, which can trigger fault codes E25 and E26. This pump is compatible with the models Victoria 24/24 and Victoria 24/24 F, among others. It is recommended to replace it when it shows these symptoms or is damaged.
VAT included
Consult via WhatsAppBaxi Roca boilers compatible with reference 7801354
Circulating pump with reference 7801354. Four confirmed compatibilities: VICTORIA 24/24 and VICTORIA 24/24 F.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Baxi Roca VICTORIA 24/24 | Victoria | Contrasted |
| Baxi Roca VICTORIA 24/24 F | Victoria | Contrasted |
| Baxi Roca NEOBIT S 24/24 | Neobit | Contrasted |
| Baxi Roca NEOBIT S 24/24 F | Neobit | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 7801354 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 7801354. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the circulation pump 7801354 resolves.
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The domestic hot water is working fine, but the heating is not warming up or is warming up very little.
Cause: If the domestic hot water is working and only the heating is failing, it is possible that the pump is not circulating water through the radiators.
Check if the radiators farthest from the boiler are cold while the nearby ones are heating up: this is an indication of poor circulation.
- 02
A metallic or rattling noise can be heard coming from the pump area, and it disappears at times.
Cause: It could be trapped air in the impeller or the shaft starting to seize, something common with years of use.
Bleed the pump; many have a central screw on the shaft for this purpose, before replacing it.
- 03
After the summer, when turning on the heating for the first time, the boiler locks out or the pump doesn't start.
Cause: The impeller has been stationary for months, and the sediments in the circuit are seizing it up.
Try to manually unlock the shaft with the motor screw before replacing the part.
- 04
The pump is hot to the touch and makes a continuous humming noise without moving normally.
Cause: The motor receives power but the shaft barely turns, straining under no load due to a mechanical blockage.
Disconnect the boiler, let it cool down, and try to manually free the shaft before deciding that the pump is dead.
Fault codes for Baxi Roca that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| E25 | Activation of the safety device due to probable pump blockage. | The seizing or failure of the pump prevents circulation and the primary circuit overheats quickly; check the 230 V supply to the pump and unblock/inspect the shaft from the front cap and the filter/return. |
| E26 | Activation of the safety device due to probable pump blockage. | With the pump blocked, the flow exceeds the setpoint due to lack of flow (overtemperature); check that the pump rotates freely and receives voltage, bleed air, and inspect for obstructions in the circuit/filter. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Baxi Roca circulator pump 7801354
- Catalogue reference
- 7801354
- Brand
- Baxi Roca
- Type of part
- Pumps
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Baxi Roca Neobit S 24/24 F Manual (PDF)Document © Baxi Roca, provided as a technical reference.
Frequently asked questions about the circulator pump 7801354
Is this pump suitable for the Victoria 24/24F boiler?
Is this pump compatible with the Vega Plus boiler?
Spare parts related to Baxi Roca Victoria
