Baxi Roca Laura 20/20 F Circulating Pump RSL16/6-3 Ref. 7803038
RefurbishedBaxi RocaPumps

Baxi Roca Laura 20/20 F Circulating Pump RSL16/6-3 Ref. 7803038

Stock · 3 units

Circulating pump for Baxi Roca Laura 20/20, Laura 30/30, R30/30, RS/RSI, and RS20/20F boilers. The label only shows the brand Baxi Roca, model RSL16/6-3 Ku C, with three speeds (1700, 2000, and 2400 min⁻¹) and IP44 protection. It circulates the water in the heating circuit; it is replaced when the pumping fails, makes noise, or the radiators do not heat.

VAT included

Compatibility

Baxi Roca boilers compatible with reference 7803038

Circulating pump with reference 7803038. 11 verified compatibilities: Laura 30/30 and Laura 30/30 F.

Proven compatibility

Boiler modelFamilyVerification
Baxi Roca Laura 30/30Laura 30Contrasted
Baxi Roca Laura 30/30 FLaura 30Contrasted
Baxi Roca Laura 30 AFLaura 30Contrasted
Baxi Roca R 30/30R 30/30Contrasted
Baxi Roca R 30/30 FR 30/30Contrasted
Baxi Roca R 30/30 FPR 30/30Contrasted
Baxi Roca R 30/30 PR 30/30Contrasted
Baxi Roca RS 20RS 20 / RSI 20/20Contrasted
Baxi Roca RS 20/20RS 20 / RSI 20/20Contrasted
Baxi Roca RSI 20/20RS 20 / RSI 20/20Contrasted
Baxi Roca NR-15/20 SPNR-15/20Contrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 7803038 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 7803038. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the circulation pump 7803038 resolves.

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The pump does not start or makes a strange noise when trying to turn

    Cause: The impeller may be seized due to limescale or there could be a worn bearing that is rubbing.

    Turn the shaft manually using the central plug and bleed the circuit before replacing it.

  • 02

    The radiators are cold even though the boiler is on.

    Cause: Without water flow, there is no circulation and the heat does not leave the boiler.

    Check if the pump has the speed selector in a low position before declaring it faulty.

  • 03

    The boiler indicates a flow or circulation fault.

    Cause: The control unit detects that not enough water is passing through the circuit and shuts down for safety reasons.

    Make sure that the circuit valves are open and that there is no trapped air before changing the pump.

  • 04

    There is a noticeable vibration or continuous humming in the pump body.

    Cause: It is usually due to air in the circuit or internal wear of the bearing.

    Bleed the radiators and the pump well; if the noise continues afterwards, it could be the pump.

Fault codes for Baxi Roca that this part resolves.

CodeFaultDiagnosis and solution
06Overtemperature open during ignition.If the circulating pump is seized/not rotating, there is no circulation in the primary circuit and the heat exchanger overheats on start-up, activating the safety clixon. Check by loosening the shaft from the front plug of the pump and verifying that it receives voltage and consumes/starts rotating.
14Overtemperature open during operation.A blocked or failing circulating pump reduces the flow during service and causes overheating of the primary, triggering the klixon. Check the actual rotation of the rotor from the plug, electrical supply, and bleed air from the circuit in case of cavitation/air pockets.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Baxi Roca circulator pump 7803038

Catalogue reference
7803038
Brand
Baxi Roca
Type of part
Pumps
Units in stock
3 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Voltage
230V
Frequency
50 Hz
Condenser
2.6 µF - 400VDB
Nominal pressure
PN6
Protection
IP44, Class F, TF95
Speeds
III 2400 min⁻¹ (0.39A / 86W) | II 2000 min⁻¹ (0.29A / 63W) | I 1700 min⁻¹ (0.20A / 42W)
Model
RSL16/6-3 Ku C
Part code
4513556
Additional code (possible batch/manufacturing)
4513774
Manufacturing date
21/05
Place of manufacture
Made in EU
Frequently Asked Questions

Frequently asked questions about the circulator pump 7803038

Is this RSL16/6-3 pump suitable for a Baxi Roca Laura 20/20 F boiler?
Yes, it is compatible with Baxi Roca Laura 20/20 F (RS20/20F) and also with Laura 20/20, Laura 30/30, R30/30, and RS/RSI.
How many speeds does the pump of the Baxi Roca Laura 20/20 F have?
Three speeds: 1700, 2000, and 2400 min⁻¹, according to the label.
Why does the pump of the Baxi Roca Laura 20/20 F need to be replaced?
It is replaced when the pumping fails, makes noise, or the radiators stop heating.
What pressure can the RSL16/6-3 pump from the Baxi Roca Laura 20/20 F withstand?
PN6, according to the available technical data.

Spare parts related to Baxi Roca R 30/30

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Baxi Roca Laura 20/20 F Circulating Pump RSL16/6-3 Ref. 7803038