VASL15/6,7-2 P Circulating Pump Ref. 160952

Vaillant boilers compatible with reference 160952

Circulating pump with reference 160952. Ten confirmed compatibilities: 242/2-5 and 282/2-5.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if the reference 160952 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 160952. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the circulation pump 160952 resolves.

The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The heating takes a long time to warm up or the radiators do not reach temperature.

  Cause: The pump does not move enough water through the circuit.

  Touch the body of the pump with the boiler on: if you don't feel any vibration, it is likely not spinning.

• 02

  The pump does not start in one of the two speeds, but it does in the other.

  Cause: The speed selector or part of the winding fails in that position.

  Change the selector to the other speed and see if it starts; if it only fails in one, check it before buying the part.

• 03

  There is an unusual noise or vibration coming from the pump.

  Cause: There may be trapped air in the chamber or a rotor that rubs while turning.

  Bleed the air from the system before declaring the pump faulty, especially if the system has been recently tampered with.

• 04

  Water is leaking from the pump shaft seal.

  Cause: The mechanical seal wears out over time and allows water to pass through gradually.

  Dry the area and check after a while of operation if the leak is coming exactly from the shaft.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Vaillant 160952 circulation pump.

Catalogue reference

160952

Brand

Vaillant

Type of part

Pumps

Units in stock

1 unit

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Model (label)

VASL15/6,7-2 P

Voltage

230V ~50Hz

Condenser

2.6 µF - 400VDB

Protection

IP44 / PN6

Thermal class

Class F - TF95

Current / power (speed II)

0.40 A / 90 W at 2280 min-1

Current / power (speed I)

0.30 A / 67 W at 2010 min-1