3 Bar Safety Valve Baxi Roca Neobit 24/24F Ref. 129400015

Baxi Roca boilers compatible with reference 129400015

Safety valve with reference 129400015. 17 confirmed compatibilities: Neobit 24/24 and Neobit 24/24 F.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if the ref. 129400015 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 129400015. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms and faults that the safety valve 129400015 resolves.

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The valve does not open even though the pressure exceeds 3 bar.

  Cause: If the seat is clogged with scale or the spring is not working, the valve may remain closed when it should open.

  With the boiler cold, observe the pressure gauge while it heats up: if it exceeds 3 bar without the valve opening, it is a fault in the opening.

• 02

  It opens at a pressure different from 3 bar, either before or after.

  Cause: The internal spring loses tension over time, which affects the point at which the valve decides to open.

  Note the exact pressure at which water is released several times: a clear and repeated deviation above 3 bar confirms the problem.

• 03

  It continuously leaks from the discharge pipe with the circuit at normal pressure.

  Cause: A worn seat or one with a trapped particle does not seal properly, even if the pressure is far from the set point.

  Pull the bleed handle a couple of times: if the dripping doesn't stop afterwards, the seat is not sealing properly.

• 04

  Water needs to be added to the circuit more often than usual without seeing a clear leak elsewhere.

  Cause: A valve that does not close completely can lose water in a nearly imperceptible way, especially if the drip falls directly into the drain.

  Follow the discharge pipe to the end: if it is damp or has recent limescale, the leak is coming from there.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Baxi Roca safety valve 129400015

Catalogue reference

129400015

Brand

Baxi Roca

Type of part

Safety Valves

Units in stock

4 units

Status

Refurbished

Warranty

1 year

Shipping

1-2 business days

Return

14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Setpoint

3 bar

Rated power/capacity

100 kW (engraved on the part next to the text FLOPRESS; it is not specified whether it is thermal power)