3 Bar Safety Valve Biasi Mura 24E Ref. BI1181100
Refurbished Manaut Safety valves

3 Bar Safety Valve Biasi Mura 24E Ref. BI1181100

The 3 Bar safety valve Biasi Mura 24E Ref. BI1181100 is responsible for releasing water if the circuit pressure exceeds 3 bar. When it fails, you will notice that it drips continuously or does not discharge at the necessary moments. This part is compatible with models from the PARVA range (such as M95.24CM/BD), MURA (MURA 24E), M97 BASICA (M97.24CM), among others. A technician must confirm through diagnosis whether it is necessary to replace the valve when the mentioned symptoms are present to avoid damage to the system.

Type of part
Safety valves
Status
Refurbished
Catalogue reference
BI1181100
Warranty
1 year
VAT included Stock · 7 units
Compatibility

Boilers Biasi compatible with reference BI1181100

Safety valve with reference BI1181100. Seven confirmed compatibilities: M95.24CM/BD and M95.28CM/BD.

Proven compatibility

Boiler modelFamilyVerification
Biasi M95.24CM/BDPARVA (M90/M91/M95/M96)Contrasted
Biasi M95.28CM/BDPARVA (M90/M91/M95/M96)Contrasted
Biasi MURA 24EWALLContrasted
Biasi M97.24CMM97 BASICContrasted
Biasi M97.23M97 BASICContrasted
Biasi MINOX ECO 24EMINOXContrasted
Biasi MINOX CONDENS 24EMINOXContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the reference BI1181100 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference BI1181100. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the safety valve BI1181100

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    It continuously drips from the discharge pipe, both in cold and hot.

    Cause: The valve seat is losing tightness, usually due to dirt or small particles trapped.

    Manually bleed the valve a couple of times, if it has a lever, to flush out the dirt before replacing it.

  • 02

    It leaks water as soon as the boiler starts, without the pressure being high.

    Cause: The internal spring activates prematurely if it is worn out or if the setting has become misadjusted with use.

    Measure with the boiler's manometer at what exact pressure it activates and compare it with the cold filling pressure of the circuit.

  • 03

    The pressure gauge rises above 3 bar and the valve does not release water.

    Cause: The mechanism gets stuck due to scale or lack of use, and does not release even when the set pressure is exceeded.

    Before changing it, check if the expansion vessel is air-free, because that causes the pressure to rise faster than normal.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the safety valve Biasi BI1181100

Catalogue reference
BI1181100
Uniclima internal SKU
VSCM24E
Brand
Manaut
Type of part
Safety valves
Units in stock
7 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Setpoint
3 bar
Connection
1½"
Frequently Asked Questions

Frequently asked questions about the safety valve BI1181100

What is the set pressure of this safety valve for the Biasi Mura 24E?
3 bar, read on the part itself.
What is the connection diameter of the safety valve for the Biasi Mura 24E?
1½, engraved on the body of the part.
Is this valve suitable for the Parva range?
Yes, the Parva range includes compatible models such as M95.24CM/BD and M95.28CM/BD.
When should the safety valve of the Biasi Mura 24E be replaced?
The technical diagnosis must confirm that it is necessary to replace it, even when it is leaking continuously or when it does not activate upon reaching 3 bar.
What is the reference for this safety valve?
VSCM24E is Uniclima’s internal SKU for locating this listing. To confirm compatibility, check the manufacturer’s reference and the exact appliance model.
How many models are compatible with this safety valve?
There are a total of 7 confirmed compatible models.
Entrega calculada por destino Delivery time shown at checkout
1-year warranty reviewed and tested
14-day return uninstalled parts
Technical support we verify your model
3 Bar Safety Valve Biasi Mura 24E Ref. BI1181100