SIT Sigma 845 Gas Valve - Biasi 6MA / 6ME - Ref. BI1123104
RefurbishedBiasiGas valvesSIT

SIT Sigma 845 Gas Valve - Biasi 6MA / 6ME - Ref. BI1123104

Stock · 5 units

SIT Sigma 845 gas valve (code 0845061), with two solenoid valves EV1 and EV2 that regulate the gas flow to the burner. Maximum inlet pressure 60 mbar, regulated outlet pressure between 1 and 37 mbar. According to external sources, it is equivalent to the Biasi BI1123104 reference, used in 6MA and 6ME boilers. It is replaced when ignition or flame modulation fails.

VAT included

Compatibility

Biasi boilers compatible with reference BI1123104

Gas valve with reference BI1123104. Eight confirmed compatibilities: 6MA and 6ME.

Proven compatibility

Boiler modelFamilyVerification
Biasi 6MA6MAContrasted
Biasi 6ME6MEContrasted
Biasi 24BITContrasted
Biasi 24GMAContrasted
Biasi 28GMAContrasted
Biasi 24GMEContrasted
Biasi 28GMEContrasted
Biasi MICRONOXMICRONOXContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. BI1123104 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference BI1123104. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the gas valve BI1123104 resolves.

The gas valve regulates and modulates the gas flow to the burner. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler does not ignite, the flame does not form.

    Cause: The solenoid valve EV1 does not open and does not allow gas to flow to the burner.

    Measure if there is power at the EV1 connector before replacing the complete gas valve.

  • 02

    The burner ignites but the flame remains low.

    Cause: The solenoid valve EV2 does not open or the outlet pressure is incorrect.

    Check if the flame increases when the demand for heating or domestic hot water rises, or if it remains the same.

  • 03

    There is a smell of gas near the gas valve.

    Cause: A gasket or the body of the gas valve may be leaking gas.

    Shut off the gas supply and ventilate the area; do not attempt to ignite until you have checked it.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the gas valve Biasi BI1123104

Catalogue reference
BI1123104
Brand
Biasi
Type of part
Gas valves
Units in stock
5 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Manufacturer
SIT
Model (screen printed)
845 SIGMA
SIT Code
0845061
Biasi equivalence
Ref. BI1123104, used in Biasi 6MA/6ME boilers
Maximum inlet pressure (Pi max)
60 mbar
Outlet pressure (Po)
1-37 mbar
Maximum current
185 mA
Ambient temperature
0/60°C
Place of manufacture
Italy (Padua)
Before purchasing
  • The actual manufacturer of the component is SIT, not the boiler brand.
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the gas valve BI1123104

Does this SIT Sigma 845 valve work for the Biasi GMA 28 boiler?
Yes, the GMA 28 is on the list of compatible boilers in this document.
What fault indicates that the gas valve of the Biasi 6ME needs to be replaced?
It is replaced when the ignition or flame modulation fails.
What is the inlet and outlet pressure that the SIT Sigma 845 gas valve of the Biasi BIT 24 can handle?
Maximum input 60 mbar and regulated output between 1 and 37 mbar, according to the label.

Spare parts related to Biasi GMA

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
SIT Sigma 845 Gas Valve - Biasi 6MA / 6ME - Ref. BI1123104