PCB Control Boiler CE24E
When you open the hot water tap or turn on the heating, the CE24E Control PCB from Fagor manages the ignition, burner modulation, pump, and safety features of the boiler. If this part fails, you will notice that the boiler does not start, gets locked, or exhibits erratic operation. The associated fault codes are F5, which indicates an internal fault in the electronic circuit, and F10, which signals a failure in the control or closure of the gas valve. This PCB is compatible with models such as the FE 27 E, among others. It is recommended to replace it when you experience these symptoms of malfunction.
VAT included
Consult via WhatsAppFagor boilers compatible with reference N03G010M3
PCB with reference N03G010M3. A proven compatibility: FE 27 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Fagor FE 27 E | Fagor Supercompact | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the part N03G010M3 is the one for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference N03G010M3. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB N03G010M3 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not ignite and there is no electrical signal on the panel.
Cause: The transformer on the PCB is not sending current to the rest of the circuit; without that output, there is no activity.
Measure with a multimeter if the transformer on the PCB is providing output voltage before declaring the board faulty.
- 02
It lights up for a moment and then turns off immediately, repeating the attempt several times.
Cause: The microcontroller on the PCB does not manage the ignition correctly; a fault there can abort the process as soon as it starts.
Count how many seconds it always takes to turn off: a fixed and repeated time points to the PCB before an external sensor.
- 03
The boiler does not respond to the temperature changes set on the panel.
Cause: The PCB does not correctly interpret the command from the control panel; if the microcontroller fails, the command does not reach the burner.
Try another temperature value and see if the flame intensity changes before blaming the PCB.
- 04
The clicking sound of a relay from the PCB is heard, but the corresponding component does not activate.
Cause: A relay can close mechanically but not provide current if its contacts are worn or oxidized internally.
Check with the multimeter for continuity and output current in that relay before replacing the entire PCB.
Fault codes for Fagor that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| F5 | Control board fault: internal fault in the electronic circuit causing the boiler to lockout. | It is the code that the brand itself directly attributes to an internal fault of the main PCB (this part); it is verified by ruling out power supply and connections, and checking that the lock persists after a reset, in which case the PCB is the cause. |
| F10 | Fault in the control or closure of the gas valve (cannot be unlocked). | The brand documents this fault as related to the control circuit of the O valve itself; when the gas valve is healthy, the origin is the control circuit governed by the PCB (this part). It is verified by measuring the signal/coil of the valve: if the valve responds correctly and the F10 persists, the cause is the PCB. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Fagor N03G010M3 PCB.
- Catalogue reference
- N03G010M3
- Brand
- Fagor
- Type of part
- PCBs (control boards)
- Units in stock
- 2 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Transformer - primary voltage
- 230V~
- Transformer - primary current (fuse T)
- 80mA/T
- Transformer - power
- 12VA
- Transformer - secondary voltage/current
- 14V / 0.65A
- Transformer - regulations
- EN 61558, EI 54/19
- Transformer - model code
- 1122883C
- Microcontroller - marking
- CONTROL 103 1130 / MU0870780 / 13/05
Frequently asked questions about the PCB N03G010M3
What technical data can be read on this PCB of the CE24E boiler?
Does this PCB Ref. N03G010M3 work for my boiler CE24E?
Spare parts related to Fagor Fagor Supercompact
