Fagor PCB CE24E / FE24E
RefurbishedFagorPCBs (control boards)

Fagor PCB CE24E / FE24E

Stock · 2 units

The Fagor CE24E / FE24E PCB is the component that controls the ignition, burner modulation, pump, and safety features of the boiler. When it malfunctions, the boiler may fail to start, become locked, or operate erratically. This board is compatible with several models, including the CE24E, FE24E, FE24NOX, FE24TC, FE26TC, FEB23E, FEB24AR, and FEE24NOX. It is recommended to replace it when these symptoms of malfunction are detected.

VAT included

Compatibility

Compatible Fagor boilers

PCB. Eight confirmed compatibilities: CE24E and FE24E.

Proven compatibility

Boiler modelFamilyVerification
Fagor CE24ECE24EContrasted
Fagor FE24EFE24EContrasted
Fagor FE24NOXFE24NOXContrasted
Fagor FE24TCFE24TCContrasted
Fagor FE26TCFE26TCContrasted
Fagor FEB23EFEB23EContrasted
Fagor FEB24ARFEB24ARContrasted
Fagor FEE24NOXFEE24NOXContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if it is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference —. If it is not visible, do not identify the part by its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB (control board) resolves

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler does not ignite or respond to the controls.

    Cause: The PCB receives the ignition command and activates the burner; if it fails, the boiler does not ignite even if there is gas and electricity.

    Check that the boiler has a stable power supply and that the visible fuse on the PCB is not blown before replacing it.

  • 02

    Intermittent ignition failures without a clear fault code

    Cause: An intermittent fault on the PCB, such as a cold solder joint or a damaged component, causes it to turn on sometimes and not at other times, without displaying a fault code.

    Note under what conditions it fails (when cold, after being on for several hours) to rule out that it's a burner issue and not the PCB.

  • 03

    The boiler turns off by itself during operation for no apparent reason.

    Cause: The PCB loses control of the combustion or a safety feature and automatically cuts off the supply.

    Check if the shutdown occurs when using hot water and heating at the same time, to rule out that the problem is another component and not the PCB.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Fiche of the Fagor PCB.

Brand
Fagor
Type of part
PCBs (control boards)
Units in stock
2 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

PCB manufacturer
Fagor (logo silk-screened on the PCB)
Transformer
MYRRA (two units)
Transformer certification
CE, cRUus, EN 60950 (myrra.com)
Before purchasing
  • The current catalog lists it as 'FE 26 E'; that exact model does not appear in the verified list of compatible boilers. Check that your model is among: CE24E, FE24E, FE24NOX, FE24TC, FE26TC, FEB23E, FEB24AR, FEE24NOX.
Frequently Asked Questions

Frequently asked questions about the PCB (control board)

Is the PCB installed in the CE24E an original Fagor?
Yes, it has the Fagor logo screen-printed directly on the PCB.
Who manufactures the transformers for this Fagor PCB for the FE24E?
MYRRA, with CE marking, cRUus, and EN 60950 standard; the PCB mounts two units.
Is this PCB suitable for a Fagor FE24E?
Yes, it is on the list of verified compatible models.
When should this PCB be checked in a Fagor FEB23E?
It is checked when the boiler does not ignite or does not respond to the controls.

Spare parts related to Fagor CE24E

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Fagor PCB CE24E / FE24E