Thermowatt PCB Chaffoteaux Niagara Delta 30 FF Ref. 61307041
RefurbishedChaffoteauxPCBs (control boards)Thermowatt

Thermowatt PCB Chaffoteaux Niagara Delta 30 FF Ref. 61307041

Stock · 1 unit

The Thermowatt PCB for the Chaffoteaux Niagara Delta 30 FF boiler is a vital component that controls the ignition, burner modulation, pump, and safety features of the boiler. When it fails, you may notice that the boiler does not start, locks out, or behaves erratically. This part is compatible with several models in the Niagara Delta range, such as the Niagara Delta 24 CF, 24 FF, 24 VMC, and the Niagara Delta 28 CF, 28 FF. It is recommended to replace the PCB when these symptoms occur or when fault code 32 appears, indicating a communication defect with the main board.

VAT included

Compatibility

Chaffoteaux boilers compatible with reference 61307041

PCB with reference 61307041. Six confirmed compatibilities: Niagara Delta 24 CF and Niagara Delta 24 FF.

Proven compatibility

Boiler modelFamilyVerification
Chaffoteaux Niagara Delta 24 CFNiagara Delta 24Contrasted
Chaffoteaux Niagara Delta 24 FFNiagara Delta 24Contrasted
Chaffoteaux Niagara Delta 24 VMCNiagara Delta 24Contrasted
Chaffoteaux Niagara Delta 28 CFNiagara Delta 28Contrasted
Chaffoteaux Niagara Delta 28 FFNiagara Delta 28Contrasted
Chaffoteaux Niagara Delta 30 FFNiagara Delta 30Contrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the ref. 61307041 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 61307041. If it is not visible, do not identify the part by its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the PCB 61307041 resolves.

The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The boiler is completely unresponsive when the switch is turned on, with no reaction at all.

    Cause: The power supply stage of the PCB does not energize the rest of the control circuit.

    Check the internal fuse and the arrival of 230V before replacing the PCB.

  • 02

    There is no ignition spark even though the fan starts normally.

    Cause: The PCB does not generate the ignition order to the electrode even though the previous cycle completes successfully.

    Check the wiring of the electrode and its continuity before replacing the PCB.

  • 03

    The ignition transformer buzzes but does not spark, and sometimes there is a burnt smell in the area of the PCB.

    Cause: The transformer integrated into this PCB, along with the silkscreen, can fail without damaging the rest of the circuit.

    Visually inspect the PCB for any burn marks or the smell of burnt components before replacing it entirely.

  • 04

    It turns off with a flame fault code as soon as it starts, even though the burner appears to be lit.

    Cause: Fault in the ionization circuit of the PCB, which does not recognize the flame even when it is present.

    Clean and check the flame detection electrode before declaring the PCB faulty.

  • 05

    The boiler takes a long time to respond when pressing the buttons or it gets "stuck" for several seconds.

    Cause: The processor of the PCB is responding slowly due to an internal fault in the electronics.

    Perform a complete reset (turn off, wait one minute, turn on) to rule out a temporary hang before replacing the PCB.

Fault codes Chaffoteaux that this part resolves

CodeFaultDiagnosis and solution
32Communication fault with the main boardThe control PCB (61307041) does not establish/receive communication with the display PCB; check the power supplies and the bus/wiring between the boards and, if they are correct, confirm by replacing or testing the control PCB.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Chaffoteaux 61307041 PCB.

Catalogue reference
61307041
Brand
Chaffoteaux
Type of part
PCBs (control boards)
Units in stock
1 unit
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days

Data read on the part and in the manufacturer's documentation

What we have not been able to verify does not appear here.

Manufacturer
Thermowatt
Manufacturer code
060102920010
Documentation

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

Frequently Asked Questions

Frequently asked questions about the PCB 61307041

Who manufactures the PCB Ref. 61307041 that is used in the Chaffoteaux Niagara Delta?
Thermowatt; the brand is printed on the screen printing of the PCB.
Does this Thermowatt PCB work for the Niagara Delta 24 FF?
Yes, the Niagara Delta 24 FF is on the list of confirmed compatible boilers for this PCB.
Is this PCB original from Chaffoteaux or from another manufacturer?
It is not from Chaffoteaux: the manufacturer listed on the part is Thermowatt.
Does this Thermowatt PCB also work for the CF versions of the Niagara Delta, or only for the FF?
It is confirmed for the 24 CF, 24 FF, 28 CF, 28 FF, and 30 FF versions of the Niagara Delta.

Spare parts related to Chaffoteaux Niagara Delta 24

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Thermowatt PCB Chaffoteaux Niagara Delta 30 FF Ref. 61307041