Saunier Duval Isofast Condens F 35 E Plate Heat Exchanger - Ref. S1024800
The plate heat exchangers from Saunier Duval in the Isofast range, such as the Isofast Condens F 35 E, are essential for transferring heat from the primary circuit to the domestic hot water instantly. When this part fails, the user will notice that the water comes out lukewarm or with fluctuating temperatures, as well as experiencing a decrease in the flow of hot water. This heat exchanger is compatible with several models from the Isofast range, as well as some from the Isomax and Isotwin ranges. It is recommended to replace it when these malfunction symptoms occur.
VAT included
Consult via WhatsAppSaunier Duval boilers compatible with reference S1024800
Plate heat exchanger with reference S1024800. 20 verified compatibilities: Isofast C28 E and Isofast C28 E1.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Saunier Duval Isofast C28 E | Isofast | Contrasted |
| Saunier Duval Isofast C28 E1 | Isofast | Contrasted |
| Saunier Duval Isofast C35 E | Isofast | Contrasted |
| Saunier Duval Isofast C35 E1 | Isofast | Contrasted |
| Saunier Duval Isofast F28 E | Isofast | Contrasted |
| Saunier Duval Isofast F28 E1 | Isofast | Contrasted |
| Saunier Duval Isofast F35 E | Isofast | Contrasted |
| Saunier Duval Isofast F35 E1 | Isofast | Contrasted |
| Saunier Duval Isofast F35 E H-MOD | Isofast | Contrasted |
| Saunier Duval Isofast F31 | Isofast | Contrasted |
| Saunier Duval Isofast C31 E | Isofast | Contrasted |
| Saunier Duval Isomax C28 E | Isomax | Contrasted |
| Saunier Duval Isomax C28 E2 | Isomax | Contrasted |
| Saunier Duval Isomax F28 E | Isomax | Contrasted |
| Saunier Duval Isomax F28 E2 | Isomax | Contrasted |
| Saunier Duval Isotwin C24 EA | Isotwin | Contrasted |
| Saunier Duval Isotwin C28 EA | Isotwin | Contrasted |
| Saunier Duval Isotwin F24 E | Isotwin | Contrasted |
| Saunier Duval Isotwin F24 EA | Isotwin | Contrasted |
| Saunier Duval Isotwin F28 EA | Isotwin | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. S1024800 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference S1024800. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the S1024800 plate heat exchanger resolves.
The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The heating works well, but the tap water comes out cold or lukewarm.
Cause: The plates are clogged with limescale and do not transfer enough heat to the domestic hot water.
Bleed the air from the boiler and check the cold water inlet filter before replacing the part.
- 02
The hot water comes out in bursts of temperature, without being constant.
Cause: The plates are partially obstructed, causing irregular water flow and temperature variations.
Reduce the flow at the tap and check if the fluctuation improves, which would indicate a partial blockage in the plates.
- 03
The pressure in the circuit rises on its own without having refilled the system.
Cause: An internal micro-leak in the heat exchanger can allow water from one circuit to pass to another and increase the pressure.
Monitor the manometer for a couple of days without touching the filling, observing if the pressure rises just when using the domestic hot water.
- 04
The boiler activates to heat the water, but it does not heat.
Cause: A heat exchanger almost completely blocked by scale does not allow water to flow between the two circuits.
Before changing it, make sure there is no filter or aerator blocked just before the heat exchanger.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Saunier Duval S1024800 plate heat exchanger datasheet
- Catalogue reference
- S1024800
- Brand
- Saunier Duval
- Type of part
- Plate heat exchanger
- Units in stock
- 5 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Saunier Duval Isotwin F24 E manual (PDF)Document © Saunier Duval, provided as a technical reference.
Frequently asked questions about the plate heat exchanger S1024800
Is this plate heat exchanger compatible with the Isofast Condens F 35 E boiler?
Which models are compatible with this plate heat exchanger?
Does this plate heat exchanger work for the Isomax C28 E2 boiler?
What is the reference for this plate heat exchanger?
Are there documented fault codes for this product?
Spare parts related to Saunier Duval Isofast
