Thermometer Bulb 20-120°C For Boiler Pressure Gauge-Aquastat Ref. 8707206132
RefurbishedJunkersPressure gauges & aquastats

Thermometer Bulb 20-120°C For Boiler Pressure Gauge-Aquastat Ref. 8707206132

When you open the tap or turn on the heating, the thermometer dial 20-120°C for the pressure gauge-aquastat of boiler Ref. 8707206132 from Junkers is responsible for measuring the temperature of the circuit. Its function is to control the pressure and temperature, so if it fails, you will notice incorrect readings that can cause lockouts due to false low pressure or poor temperature regulation. This component is compatible with several models from Junkers, such as the Novastar ZW20-1 AME, ZW23, ZW24, and others. A technician must confirm through diagnosis whether it needs to be replaced when you start having issues with temperature or pressure readings.

Type of part
Pressure gauges & aquastats
Status
Refurbished
Catalogue reference
8707206132
Warranty
1 year
VAT includedStock · 3 units
Compatibility

Junkers boilers compatible with reference 8707206132

Pressure gauge with reference 8707206132. 11 verified compatibilities: Novastar ZW20-1 AME (ZW20 series) and Novastar ZW23.

Proven compatibility

Boiler modelFamilyVerification
Junkers Novastar ZW20-1 AME (series ZW20)JunkersContrasted
Junkers Novastar ZW23JunkersContrasted
Junkers ZW24JunkersContrasted
Junkers ZW28JunkersContrasted
Junkers ZW30JunkersContrasted
Junkers ZS20JunkersContrasted
Junkers ZS23JunkersContrasted
Junkers Water Heater WR11JunkersContrasted
Junkers Water Heater WR14JunkersContrasted
Junkers Water Heater WR18JunkersContrasted
Junkers CeraclassJunkersContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 8707206132 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 8707206132. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis on the manometer 8707206132

The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The temperature indicator on the pressure gauge is not visible or is blurry.

    Cause: The printed dial has faded or peeled off due to heat and humidity, making it difficult to read the scale.

    Check with a flashlight if the dial is readable under the glass: sometimes it is just fogged up on the inside and it is not necessary to replace it.

  • 02

    The needle shows a temperature that does not match that of the radiators.

    Cause: The dial has shifted or was mounted rotated, misaligning the reading even though the needle is functioning correctly.

    Compare the reading with a contact thermometer on the supply pipe before considering that the bulb is faulty.

  • 03

    The glass or the dial is broken or scratched, and the scale cannot be read.

    Cause: A blow or the wear of the plastic has damaged the printed dial or its protection.

    This symptom may be related to the part, but it does not confirm that it is faulty. A technician must check the equipment and its inspection according to the manual before deciding on a repair or replacement.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the Junkers pressure gauge 8707206132

Catalogue reference
8707206132
Uniclima internal SKU
ACUZW20
Brand
Junkers
Type of part
Pressure gauges & aquastats
Units in stock
3 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Temperature range
20-120 °C
Frequently Asked Questions

Frequently asked questions about the pressure gauge 8707206132

Is this thermometer bulb suitable for the Ceraclass boiler?
Yes, the Ceraclass is on the list of boilers compatible with Ref. 8707206132.
What temperature range does the red needle of this thermometer indicate?
From 20 to 120 °C, according to the scale printed on the dial.
Is this sphere suitable for the WR14 boiler or only for the ZW20?
It works for both: WR14 and ZW20 are on the list of compatible boilers, along with NW24, WR11, WR18, ZW23, and ZW24.

Spare parts related to Junkers Junkers

Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Thermometer Bulb 20-120°C For Boiler Pressure Gauge-Aquastat Ref. 8707206132