Pressure Gauge Boiler Junkers Euroline ZW23 AE/KE

Junkers boilers compatible with reference 8707208004

Pressure gauge with reference 8707208004. Ten verified compatibilities: ZS23AE23S2805 and ZS23AE31S2805.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 8707208004 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 8707208004. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis on the manometer 8707208004

The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The pressure gauge stays at zero even though the system is filled and pressurized.

  Cause: The internal bellows have broken or seized and no longer transmit the actual circuit pressure to the needle.

  Bleed or refill the circuit using the filling key and observe the needle; if water enters with pressure and it doesn't respond, confirm the fault of the pressure gauge.

• 02

  The needle does not move or gets stuck halfway through its range.

  Cause: The mechanism seizes over time or due to internal dirt, especially if the boiler has been unused for a long time.

  This symptom may be related to the part, but it does not confirm that it is faulty. A technician must check the equipment and its inspection according to the manual before deciding on a repair or replacement.

• 03

  The sphere is scratched or cloudy, and the scale is not clearly visible.

  Cause: The front glass or plastic gets scratched from mounting impacts or fogs up due to moisture inside the body.

  Check if the fogging disappears when the area dries; if it persists or there are cracks, the body of the pressure gauge is damaged, not just the surface.

• 04

  Water is leaking from the pressure gauge connection to the circuit.

  Cause: The gasket or the thread of the connection deteriorates over time, and water leaks from there, not from the pressure gauge mechanism.

  Tighten the connection with a wrench and check if the leak stops; if it continues to drip after tightening, it's the gasket and there's no need to replace the entire pressure gauge.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Data sheet for the Junkers pressure gauge 8707208004

Catalogue reference

8707208004

Uniclima internal SKU

MBCJEZW23

Brand

Junkers

Type of part

Pressure gauges & aquastats

Units in stock

0 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Pressure range

0-4 bar

Reference green zone

approx. 1-2 bar, with a dashed line towards ~2.3 bar

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Junkers Euroline ZS23KE31S2895 manual (PDF) Document © Junkers, provided as a technical reference.