Kramer 1/2" Safety Valve For Sime Brava Slim 30 BF
RefurbishedSimeSafety valvesKramer

Kramer 1/2" Safety Valve For Sime Brava Slim 30 BF

If you notice continuous dripping or that the valve does not discharge when the circuit pressure exceeds the limit, a technical diagnosis must confirm if you need the Safety Valve Kramer 1/2" for Sime Brava Slim 30 BF, reference 6040225. This valve is designed to release water in case the pressure exceeds 3 bar, thus protecting the system. It is compatible with several boilers from the Brava Slim range, such as the Brava Slim 25 BF and the Brava Slim HE 30, among others. A technician must confirm through diagnosis if it is necessary to replace it when visible faults such as dripping or inability to discharge are present.

Type of part
Safety valves
Catalogue reference
6040225
Warranty
1 year
VAT includedStock · 6 units
Compatibility

Sime boilers compatible with reference 6040225

Safety valve with reference 6040225. Eight confirmed compatibilities: Brava Slim 25 BF and Brava Slim 30 BF.

Proven compatibility

Boiler modelFamilyVerification
Sime Brava Slim 25 BFBrava SlimContrasted
Sime Brava Slim 30 BFBrava SlimContrasted
Sime Brava Slim HE 30Brava SlimContrasted
Sime Brava Slim LN 25Brava SlimContrasted
Sime Brava Slim LN 30Brava SlimContrasted
Sime Murelle HE 30MurelleContrasted
Sime Planet HE 30PlanetContrasted
Sime Praktica HE 25PrakticaContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if the reference 6040225 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 6040225. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms that require diagnosis in the safety valve 6040225

The safety valve releases pressure when the circuit exceeds its setting. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    Water is constantly dripping from the discharge tube, even when the boiler is cold.

    Cause: The valve seat does not seal properly, usually due to a trapped impurity or wear of the internal gasket.

    Before replacing it, check the air pressure of the expansion vessel with the circuit empty. If it is low, the valve will trigger more than usual without being faulty.

  • 02

    When the boiler reaches temperature, a jet of water comes out of the gas valve and then it stops.

    Cause: The pressure in the circuit rises above the set point because the system does not properly absorb the expansion of the hot water.

    Check the charge pressure of the expansion vessel and the cold filling pressure of the circuit before replacing the gas valve.

  • 03

    The valve does not release water even though the pressure gauge shows higher than usual pressure.

    Cause: The internal mechanism gets stuck due to the accumulation of limescale or because it has not been activated for a long time.

    Manually operate the bleed lever, if it has one, to check if it releases water before considering it blocked.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for the safety valve Sime 6040225

Catalogue reference
6040225
Uniclima internal SKU
VSBS30BF
Brand
Sime
Type of part
Safety valves
Units in stock
6 units
Status
Refurbished
Warranty
1 year
Shipping
Delivery time shown at checkout
Return
14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Manufacturer
Kramer
Connection
1/2"
Frequently Asked Questions

Frequently asked questions about the safety valve 6040225

Does this Kramer 1/2" safety valve fit the Sime Murelle HE 30?
Yes, the Murelle HE 30 is on the list of compatible boilers in this document.
Which manufacturer installs this safety valve in the Sime Brava Slim 30 BF?
Kramer, according to the label of the part.
What connection does this Kramer safety valve require for the Sime Praktica HE 25?
1/2".
Is this gas valve compatible with the Sime Brava Slim HE 30?
Yes, the Brava Slim HE 30 is listed in the compatible boilers section of this document.
Entrega calculada por destinoDelivery time shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Kramer 1/2" Safety Valve For Sime Brava Slim 30 BF