Refurbished: Expansion Vessel Compatible With Vaillant VM/VMW, catalog reference 181057

Refurbished expansion vessel compatible with Vaillant VM/VMW, catalogue reference 181057

Stock · 5 units

Refurbished expansion vessel identified by catalogue reference 181057. The photos show no legible label; before buying, compare the reference, volume, dimensions, bracket and connection with the installed part.

VAT included

Compatibility

Vaillant models associated with catalog reference 181057

The following associations come from external catalogues. They are not presented as confirmed compatibility because the available photos show no legible manufacturer label.

Models cited in catalogues (verification required)

The following associations come from external catalogues. They are not presented as confirmed compatibility because the available photos show no legible manufacturer label.

Vaillant turboTEC plus VMW 242/4-5turboTEC plusCheck required · catalogue evidence
Vaillant turboTEC plus VMW 282/4-5turboTEC plusCheck required · catalogue evidence
Vaillant turboTEC plus VMW 322/4-5turboTEC plusCheck required · catalogue evidence
Vaillant atmoTEC plus VM (242/4-5, 282/4-5, 322/4-5)atmoTEC plusCheck required · catalogue evidence
Vaillant Turbomax plus / pro VMWTurbomaxCheck required · catalogue evidence
Vaillant atmoMAX plus / pro VMatmoMAXCheck required · catalogue evidence

Compare the reference, volume, dimensions, bracket and connection of the installed part. How to check it ·

Guide

How to check if ref. 181057 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Locate the full label or reference on the part installed in the boiler; do not identify it by shape alone.
  2. Note the boiler’s complete model and serial number.
  3. Compare volume, diameter, depth, bracket position and connection type.
  4. If any detail is missing or differs, please send photos of the installed part and its connection before purchasing.
Diagnosis and fault codes

Symptoms and faults that the expansion vessel 181057 resolves.

The expansion vessel absorbs the expansion of water when heated. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    System pressure falls repeatedly

    Cause: Loss of pre-charge or a damaged diaphragm is possible, but leaks, vents, or valves can cause the same symptom.

    Avoid repeatedly topping up the circuit. A technician should isolate and depressurise it, then measure the pre-charge with suitable instruments.

  • 02

    Pressure rises quickly as the system heats

    Cause: A vessel with no pre-charge may stop absorbing expansion, although other causes are possible.

    Record cold and hot pressure readings and have a professional check the vessel and filling valve.

  • 03

    The safety valve discharges water

    Cause: It may be reacting to overpressure linked to the vessel, but it can also be dirty, damaged or affected by the filling circuit.

    Do not handle the valve while hot. A professional should inspect the vessel, valve and circuit before parts are replaced.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for Vaillant expansion vessel 181057

Catalogue reference
181057
Brand
Vaillant
Type of part
Expansion vessels
Units in stock
5 units
Status
Refurbished
Warranty
1 year
Entrega
Cost and time calculated for the selected country at checkout
Return
14 days
Before purchasing
  • The available photos show no legible manufacturer label or code stamped on the part.
  • Reference 181057 and the listed models come from external catalogs and must be checked against the installed part before purchase.
  • Depressurising, pre-charging and fitting the vessel must be carried out by a professional with the circuit cold, isolated and depressurised.
Frequently Asked Questions

Frequently asked questions about the expansion vessel 181057

Will it fit my Vaillant VM or VMW?
The boiler model alone is not enough. Catalogues associate the listed models with reference 181057, but this unit’s photos show no legible label. Compare the installed part, dimensions, bracket and connection.
Is 181057 the Uniclima SKU?
No. VETTVMWES282 is the internal SKU. 181057 is retained as a catalogue reference and is not declared as an MPN verified on this unit’s label.
Can I fit and pre-charge the vessel myself?
The circuit must be isolated and depressurised and the pre-charge adjusted with instruments. A qualified professional should perform the work.

Related Vaillant spare parts

Delivery by countryexact estimate shown at checkout
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Refurbished: Expansion Vessel Compatible With Vaillant VM/VMW, catalog reference 181057