Chaffoteaux Pigma Green Evo PCB - Ref. 60001899
When you open the hot water tap, the Chaffoteaux Pigma Green Evo PCB - Ref. 60001899 activates to control the ignition and modulation of the burner. This part is responsible for managing the pump and the safety features of the boiler. If it fails, the boiler may not start, may lock out, or may exhibit erratic operation, displaying faults such as 3 03, 3 05, 3 06, or 3 07. It is compatible with Chaffoteaux Pigma Green boilers, among others, such as the Alixia Green and Ariston Clas Premium Evo models. It is recommended to replace it if you experience these issues to restore the proper functioning of your system.
VAT included
Consult via WhatsAppChaffoteaux boilers compatible with reference 60001899 03
PCB with reference 60001899 03. Ten verified compatibilities: PIGMA GREEN EBUS2 25 and PIGMA GREEN EBUS2 30.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Chaffoteaux PIGMA GREEN EBUS2 25 | Chaffoteaux Pigma Green | Contrasted |
| Chaffoteaux PIGMA GREEN EBUS2 30 | Chaffoteaux Pigma Green | Contrasted |
| Chaffoteaux PIGMA GREEN EBUS2 35 | Chaffoteaux Pigma Green | Contrasted |
| Chaffoteaux ALIXIA GREEN 24 | Chaffoteaux Alixia Green | Contrasted |
| Chaffoteaux ALIXIA GREEN 29 | Chaffoteaux Alixia Green | Contrasted |
| Chaffoteaux CLAS PREMIUM EVO 24 | Ariston Clas Premium Evo | Contrasted |
| Chaffoteaux CLAS PREMIUM EVO 30 | Ariston Clas Premium Evo | Contrasted |
| Chaffoteaux CLAS PREMIUM EVO 35 | Ariston Clas Premium Evo | Contrasted |
| Chaffoteaux EGIS PREMIUM 24 | Ariston Egis Premium | Contrasted |
| Chaffoteaux EGIS PREMIUM 30 | Ariston Egis Premium | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 60001899 03 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 60001899 03. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the PCB 60001899 03 resolves.
The PCB controls the ignition, modulation, and safety features of the boiler. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The boiler does not turn on at all.
Cause: The PCB is not receiving power and is not supplying the rest of the circuit.
Check the 2A fuse on the PCB before replacing it.
- 02
When pressing RESET, the boiler does not respond.
Cause: The microcontroller is not working because it has lost power or is locked up.
Check if there is power at the terminals N and L of the PCB before considering it faulty.
- 03
An error appears on the screen and the boiler locks out.
Cause: The electronics detect a problem with the ignition and stop the process for safety reasons.
Note the fault code and make sure it is not an external sensor before replacing the PCB.
- 04
The boiler works, but it loses the time and programming when the power goes out.
Cause: The memory of the PCB does not retain data without power.
Check if the problem always occurs with power outages before replacing the component.
Fault codes Chaffoteaux that this part resolves
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 3 03 | Main PCB fault | Internal fault of the main PCB (microcontroller/power stages/relays). Check 230 V at the input, auxiliary DC voltages (5/12 V), fuses/tracks and isolate peripherals; if it persists, replace the PCB. |
| 3 05 | Main PCB fault | Repeated internal fault in the main PCB. Check power supplies and ground, absence of shorts in connectors/buses, and ensure there is no thermal damage; if the checks are correct, the board is faulty. |
| 3 06 | Main PCB fault | Internal anomaly of the main board (logical or component failure). Check regulated voltages, spurious resets, and disconnect peripheral loads; if the fault persists after isolating peripherals, replace the PCB. |
| 3 07 | Main PCB fault | Critical internal fault of the main PCB. Checks: stable power supply, correct 5/12 V, fuses, tracks/burns, and ground continuity; if the above is ruled out, the solution is to replace the board. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Chaffoteaux 60001899 03 PCB.
- Catalogue reference
- 60001899 03
- Brand
- Chaffoteaux
- Type of part
- PCBs (control boards)
- Units in stock
- 1 unit
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- Fuse
- FUSE 2A
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Chaffoteaux PIGMA GREEN EBUS2 25 Manual (PDF)Document © Chaffoteaux, provided as a technical reference.
Frequently asked questions about the PCB 60001899 03
Is this Chaffoteaux Pigma Green Evo PCB – Ref. 60001899 compatible with the Ariston Egis Premium 24?
Can I use the Chaffoteaux Pigma Green Evo PCB in an Ariston Clas Premium Evo 30?
What does the FUSE 2A label on the PCB mean?
How many models are compatible with the Chaffoteaux Pigma Green Evo PCB?
What are the documented fault codes for this PCB?
Does this PCB work for the Chaffoteaux Pigma Green EBUS2 25?
Spare parts related to Chaffoteaux Chaffoteaux Pigma Green
