Microgenus 23 MFFI Boiler Plate Heat Exchanger Ref. 571646

Microgenus 23 MFFI Boiler Plate Heat Exchanger Ref. 571646

Stock · 4 units

The plate heat exchanger of the Microgenus 23 MFFI boiler, Ref. 571646, from Ariston, is responsible for transferring heat from the primary circuit to the domestic hot water instantly. When it fails, the user notices that the water comes out lukewarm or with fluctuating temperature, in addition to experiencing a decrease in the flow of hot water. This component is compatible with the Genus 23 MFFI and Microgenus 23 MFFI models, among others. It is recommended to replace it when these malfunction symptoms occur.

VAT included

Compatibility

Ariston boilers compatible with reference 571646

Plate heat exchanger with reference 571646. Two confirmed compatibilities: Genus 23 MFFI and Microgenus 23 MFFI.

Proven compatibility

Boiler modelFamilyVerification
Ariston Genus 23 MFFIGenus 23 MFFIContrasted
Ariston Microgenus 23 MFFIMicrogenus 23 MFFIContrasted

Can't see your model or have questions? The printed reference takes precedence. How to check it ·

Guide

How to check if ref. 571646 is the part for your boiler

What determines it is not the boiler model, but the reference printed on the part you already have installed.

  1. Find the reference printed on the installed part and check whether it matches the catalogue reference 571646. If it is not visible, do not identify the part from its shape alone.
  2. Check the full boiler model on its data plate and look for it in the model associations on this page.
  3. Compare the connections and physical body with the original part before installation.
  4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Diagnosis and fault codes

Symptoms and faults that the plate heat exchanger 571646 resolves.

The plate heat exchanger transfers heat to the domestic hot water. These are the typical symptoms and what to do:

Common symptoms and faults

  • 01

    The hot water comes out lukewarm or the temperature fluctuates even though the tap is set.

    Cause: The heat exchanger plates are clogged with scale, and heat is not being transferred consistently.

    Reduce the flow of the tap and see if the temperature stabilizes; if it improves with less water, the heat exchanger is the cause.

  • 02

    The boiler takes a few extra seconds to provide hot water every time you turn on the tap.

    Cause: With accumulated heat, the heat exchanger takes longer to heat the water that passes through the plates.

    Time the delay and compare it with what you remember from before; an increasing delay indicates progressive embedding.

  • 03

    There is moisture or a fine drip at the bottom of the boiler.

    Cause: The joints between the plates lose tightness with daily use.

    Dry the area well and turn on the boiler for domestic hot water; if the dripping appears, it points to the heat exchanger.

  • 04

    The pressure in the system decreases over the days without any visible leak.

    Cause: An internal micro-leak in the heat exchanger allows water to pass between circuits without being noticeable from the outside.

    Fill up to the working pressure and check the pressure gauge a couple of days later without using the boiler.

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Technical data

Data sheet for Ariston plate heat exchanger 571646

Catalogue reference
571646
Brand
Ariston
Type of part
Plate heat exchanger
Units in stock
4 units
Status
Refurbished
Warranty
1 year
Shipping
1-2 business days
Return
14 days
Frequently Asked Questions

Frequently asked questions about the plate heat exchanger 571646

For which models is the heat exchanger compatible with the Microgenus 23 MFFI boiler Ref. 571646?
It is compatible with the Genus 23 MFFI and Microgenus 23 MFFI models.
What is the function of the plate heat exchanger in the Microgenus 23 MFFI boiler?
Transfer the heat from the primary circuit to the domestic hot water or heating.
What is the reference for the plate heat exchanger for the Microgenus 23 MFFI boiler?
The reference for the heat exchanger is ITPLC23MFFI.
Are there documented fault codes for this heat exchanger?
No, there are no documented fault codes for this product.
How many models are compatible with the heat exchanger of the Microgenus 23 MFFI boiler?
There are a total of 2 models confirmed as compatible.

Spare parts related to Ariston Genus 23 MFFI

Delivery 1–2 daysworking days, mainland Spain
1-year warrantyreviewed and tested
14-day returnuninstalled parts
Technical supportwe verify your model
Microgenus 23 MFFI Boiler Plate Heat Exchanger Ref. 571646