Pressure Gauge Code 8717208061 For Boiler ZWE 24-3, ZWE 24-3 MFA, ZWE 28-3, ZWE243M
The Junkers Eurostar and Cerastar boilers use the pressure gauge 8717208061, which measures and controls the pressure and temperature of the boiler circuit. If this part fails, you may notice incorrect readings, which can cause the boiler to lock out due to a false lack of pressure or not regulate the temperature properly. This pressure gauge is compatible with models such as ZWE 24-3, ZWE 24-3 MFA, ZWE 28-3, among others. A technician should confirm through diagnosis whether it needs to be replaced when you start observing these symptoms to avoid further issues.
- Type of part
- Pressure gauges & aquastats
- Status
- Refurbished
- Catalogue reference
- 8717208061
- Warranty
- 1 year
Junkers boilers compatible with reference 8717208061
Pressure gauge with reference 8717208061. Five confirmed compatibilities: ZWE 24-3 HA and ZWE 24-3 HK.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Junkers ZWE 24-3 HA | Junkers Eurostar / Cerastar ZWE 24-3 | Contrasted |
| Junkers ZWE 24-3 HK | Junkers Eurostar / Cerastar ZWE 24-3 | Contrasted |
| Junkers ZE 24-3 MFA | Junkers ZE 24-3 | Contrasted |
| Junkers ZE 24-3 MFK | Junkers ZE 24-3 | Contrasted |
| Junkers ZWE 28-3 HA | Junkers ZWE 28-3 | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 8717208061 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 8717208061. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis on the manometer 8717208061
The manometer shows the pressure of the boiler circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The yellow needle of the manometer does not move and does not show the pressure changes.
Cause: The Bourdon tube is clogged with scale from the circuit and does not transmit the pressure to the needle.
Bleed or fill the water slowly and watch the yellow needle; if it doesn't move, confirm the fault.
- 02
Drops or a rust ring appear under the gauge sphere.
Cause: The connection fitting gasket has deteriorated and is not sealing properly.
Dry the area and check in 24-48 hours if the humidity reappears before deciding to replace the part.
- 03
The boiler shows a low pressure fault even though the circuit is full and the radiators are working fine.
Cause: The needle does not accurately reflect the actual pressure due to an internal fault of the pressure gauge.
Compare the reading of the yellow gauge with the filling valve or a portable manometer before replacing the part.
- 04
The boiler interrupts the supply of domestic hot water or heating for no apparent reason.
Cause: If the pressure gauge has a pressure switch, a poor temperature contact can cause random shutdowns.
Note the water temperature when the cut occurs to see if it repeats before changing the part.
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Junkers 8717208061 pressure gauge datasheet
- Catalogue reference
- 8717208061
- Uniclima internal SKU
- MPEZWE28
- Brand
- Junkers
- Type of part
- Pressure gauges & aquastats
- Units in stock
- 7 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Part code
- 8717208061
- Scale
- Graduated in bar
- Needle color
- Yellow
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Junkers ZWE 24-3 HA manual (PDF) Document © Junkers, provided as a technical reference.
Frequently asked questions about the pressure gauge 8717208061
What code does this pressure gauge have for the ZWE 24-3 and ZWE 28-3 boilers?
Is this pressure gauge compatible with the ZWE243M?
Is this pressure gauge suitable for the ZWE 24-3 MFA boiler?
