Huba Control Pressure Sensor 401.93J00 - Baxi Roca Laura 30/30F Ref. 122460020

Baxi Roca boilers compatible with reference 122460020

Pressure switch with reference 122460020. Nine verified compatibilities: Laura 20 AF and Laura 20 F.

Proven compatibility

Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.

How to check if ref. 122460020 is the part for your boiler

The part reference, model, and equipment revision must be verified against the manufacturer's documentation.

1. Find the reference printed on the installed part and check whether it matches the catalogue reference 122460020. If it is not visible, do not identify the part from its shape alone.
2. Check the full boiler model on its data plate and look for it in the model associations on this page.
3. Compare the connections and physical body with the original part before installation.
4. If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.

Symptoms that require diagnosis in the pressure switch 122460020

The pressure switch controls the air or water pressure to authorize operation. These are the typical symptoms and what to do:

Common symptoms and faults

• 01

  The boiler indicates a pressure fault even though the flue appears normal.

  Cause: The sensor sends an incorrect signal to the control board, which is not within the acceptable range.

  Check that the wiring of the sensor is not frayed, cut, or making poor contact.

• 02

  The burner does not ignite even though the extractor is functioning properly.

  Cause: If the sensor does not send a valid signal, the control board does not allow the gas valve to open.

  If you have a multimeter, measure the output current of the sensor; if it doesn't change when starting the fan, the problem is there.

• 03

  The pressure fault appears intermittently, not always at the same point in the cycle.

  Cause: A sensor gives unstable readings if its membrane or internal circuit is damaged.

  Check the silicone tubes of the sensor for any cracks, disconnections, or condensation.

• 04

  The pressure switch trips more often depending on the weather conditions or the installation.

  Cause: Variations in external pressure can cause an old sensor to give incorrect readings.

  Note the conditions under which the fault occurs before deciding whether it is the sensor or something related to the flue.

Fault codes Baxi Roca that require diagnosis

These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.

Datasheet for the Baxi Roca 122460020 pressure switch

Catalogue reference

122460020

Uniclima internal SKU

PCRL3030F

Brand

Baxi Roca

Type of part

Pressure switches

Units in stock

0 units

Status

Refurbished

Warranty

1 year

Shipping

Delivery time shown at checkout

Return

14 days

Part data and available documentation

Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.

Code

401.93J00

Pressure range

0...+3 mbar

Maximum pressure

25 mbar

Power supply

12VDC

Output

0.5-4.5V RL>15kOhm

Manufacturer

Huba Control

Manuals and technical documentation

Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.

• Baxi Roca Laura 20/20 F Manual (PDF) Document © Baxi Roca, provided as a technical reference.