Ferroli Domina F 24 E Grundfos Circulating Pump Ref. 39808300
Grundfos UPS 15-50 A0 circulator pump (Ferroli FERP/N code: 59865500), with three speeds, insulation class H, and protection degree IP42 according to its label. It is installed in Ferroli Domina, Domitop, Domicompact, and Ferella F24 boilers. It circulates the water in the heating circuit; it should be checked when it fails, makes noise, leaks, or stops circulating water. Replacement requires a technical diagnosis.
- Type of part
- Pumps
- Status
- Refurbished
- Catalogue reference
- 39808300
- Warranty
- 1 year
Ferroli boilers compatible with reference 39808300
Circulating pump with reference 39808300. Nine confirmed compatibilities: F 24 E and C 24 E.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Ferroli F 24 E | Domina | Contrasted |
| Ferroli C 24 E | Domina | Contrasted |
| Ferroli 80 E | Domina | Contrasted |
| Ferroli Insert F24E | Domina | Contrasted |
| Ferroli Plus F24E | Domina | Contrasted |
| Ferroli F 24 E | Domitop | Contrasted |
| Ferroli C 24 E | Domitop | Contrasted |
| Ferroli F 24 MEL | Ferella | Contrasted |
| Ferroli Gold F24 MEL | Ferella | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if ref. 39808300 is the part for your boiler
The part reference, model, and equipment revision must be verified against the manufacturer's documentation.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 39808300. If it is not visible, do not identify the part from its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms that require diagnosis in the circulator pump 39808300
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The radiators are cold even though the boiler ignites the burner.
Cause: The pump rotor does not rotate, preventing hot water from flowing out of the heat exchanger to the circuit.
Check if the boiler's outlet pipe is hot and the return pipe is cold: this indicates that the water is not circulating.
- 02
The pump makes noises or vibrates while operating.
Cause: This may be caused by air in the rotor chamber or wear in the bearing.
Bleed the air from the pump and the radiators before considering their replacement, especially after filling the system.
- 03
There is a water leak from the pump shaft.
Cause: The mechanical seal is worn and allows water to escape gradually with use.
Dry the area and check after a period of operation if the leak comes from the shaft and not from a nearby joint.
- 04
The rotor is stuck and the pump does not start, especially if the boiler has been inactive for a long time.
Cause: The accumulation of scale and rust during inactivity can block the shaft.
With the boiler cold and turned off, try turning the shaft by hand using the front screw before deciding to replace the pump.
Ferroli fault codes that require diagnosis
| Code | Fault | Technical checks |
|---|---|---|
| F41 | The boiler shuts down due to overheating. | If the pump does not circulate the water properly, the heat exchanger may reach dangerous temperatures. This activates the heat exchanger protection. Check that the pump is working and that there are no obstructions in the system. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Ferroli 39808300 circulation pump.
- Catalogue reference
- 39808300
- Uniclima internal SKU
- BFDF24E
- Brand
- Ferroli
- Type of part
- Pumps
- Units in stock
- 0 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- Delivery time shown at checkout
- Return
- 14 days
Part data and available documentation
Contrast the label codes, PCB, and revision with the installed part; they are not necessarily equivalent references.
- Grundfos model
- UPS 15-50 A0
- Ferroli code
- FERP/N:59865500
- Voltage
- 230V~
- Frequency
- 50Hz
- Condenser
- 2 µF
- Degree of protection
- IP 42
- Insulation class
- Class H
- Maximum pressure
- Max. 3 bar
- Current and power speed 1
- 0.18 A / 40 W
- Current and power speed 2
- 0.29 A / 65 W
- Current and power speed 3
- 0.39 A / 90 W
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Ferroli F 24 E Manual (PDF) Document © Ferroli, provided as a technical reference.
Frequently asked questions about the circulator pump 39808300
Is this Grundfos UPS 15-50 A0 pump suitable for a Ferroli Domina F24E?
Who manufactures the pump with reference 39808300?
How many speeds does the pump of the Ferroli Domitop C24E have?
What fault does replacing this pump resolve in a Ferroli Domicompact F24?
What is the maximum pressure the pump of the Ferroli Domina 80 E can handle?
What capacitor does this Grundfos pump use?
Spare parts related to Ferroli Domina
