Wilo INTKSL15/5-1 Circulating Pump for Ariston AS 24 FF - Ref. 6272340
Circulating pump manufactured by Wilo (model INTKSL15/5-1), installed in Ariston boilers from the AS, BS, EGIS, and MATIS ranges. It moves the water of the heating and domestic hot water circuit of the boiler. It is replaced when it fails, makes noise, leaks from the shaft, or the circuit stops circulating. It operates at 230V/50Hz, 82W, and 0.36A.
VAT included
Consult via WhatsAppAriston boilers compatible with reference 60001584
Circulating pump with reference 60001584. 23 verified compatibilities: AS 24 CF NG and AS 24 CF LPG.
Proven compatibility
| Boiler model | Family | Verification |
|---|---|---|
| Ariston AS 24 CF NG | AS 24 | Contrasted |
| Ariston AS 24 CF LPG | AS 24 | Contrasted |
| Ariston AS 24 FF NG | AS 24 | Contrasted |
| Ariston AS 24 FF LPG | AS 24 | Contrasted |
| Ariston BS 24 CF | BS 24 / BS II 24 | Contrasted |
| Ariston BS 24 FF | BS 24 / BS II 24 | Contrasted |
| Ariston BS 24 FF LPG | BS 24 / BS II 24 | Contrasted |
| Ariston BS II 24 CF NG | BS 24 / BS II 24 | Contrasted |
| Ariston BS II 24 FF NG | BS 24 / BS II 24 | Contrasted |
| Ariston BS II 24 FF LPG | BS 24 / BS II 24 | Contrasted |
| Ariston BS II 15 FF | BS 24 / BS II 24 | Contrasted |
| Ariston EGIS 24 CF NG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston EGIS 24 CF LPG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston EGIS 24 FF NG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston EGIS 24 FF LPG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston EGIS PLUS 24 CF NG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston EGIS PLUS 24 CF LPG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston EGIS PLUS 24 FF NG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston EGIS PLUS 24 FF LPG | EGIS 24 / EGIS PLUS 24 | Contrasted |
| Ariston MATIS 24 CF NG | MATIS 24 | Contrasted |
| Ariston MATIS 24 CF LPG | MATIS 24 | Contrasted |
| Ariston MATIS 24 FF NG | MATIS 24 | Contrasted |
| Ariston MATIS 24 FF LPG | MATIS 24 | Contrasted |
Can't see your model or have questions? The printed reference takes precedence. How to check it · Send us a photo via WhatsApp.
How to check if the ref. 60001584 is the part for your boiler
What determines it is not the boiler model, but the reference printed on the part you already have installed.
- Find the reference printed on the installed part and check whether it matches the catalogue reference 60001584. If it is not visible, do not identify the part by its shape alone.
- Check the full boiler model on its data plate and look for it in the model associations on this page.
- Compare the connections and physical body with the original part before installation.
- If anything is unclear, send us a photo of the marking via WhatsApp before placing your order.
Symptoms and faults that the circulation pump 60001584 resolves.
The circulation pump circulates the water in the heating circuit. These are the typical symptoms and what to do:
Common symptoms and faults
- 01
The radiators are cold or lukewarm even though the boiler turns on and reaches temperature.
Cause: The pump is not moving the water with sufficient flow and the heat is not reaching the radiators.
Check if the pump vibrates and makes a whirring noise, or if it is completely stopped, before replacing it.
- 02
The pump makes a buzzing or vibrating noise but does not move the water.
Cause: The shaft or the impeller may be seized due to limescale or from being idle during the summer.
With the boiler turned off and cold, remove the central plug from the motor and try to turn the shaft by hand with a flat screwdriver.
- 03
Water or moisture appears in the area of the pump, near the head.
Cause: The mechanical seal of the shaft wears out with use and starts to leak from there.
Dry the area and monitor if humidity reappears after a while of operation before replacing the pump.
- 04
After months of not using the heating, the pump does not start on the first attempt of the year.
Cause: The shaft gets stuck due to sediment after months of being stationary without turning.
Force the manual rotation of the shaft with the central screw before discarding the pump and buying a new one.
- 05
The boiler works but heats very slowly or takes a long time to increase in temperature.
Cause: An insufficient flow due to a weak or partially blocked pump reduces heat exchange in the radiators.
Check that the radiator valves and the circuit bleed valve are not closed before blaming the pump.
Fault codes for Ariston that this part resolves.
| Code | Fault | Diagnosis and solution |
|---|---|---|
| 104 | Insufficient circulation in the heating circuit. | A blocked/faulty circulator pump or one with air does not move the flow, and the PCB detects low flow; check voltage to the pump, bleed the shaft/plug, and ensure the pump rotates and consumes, as well as ΔT supply/return. |
| 103 | Insufficient circulation. | If the pump does not circulate (blockage, damaged coil, or air), the flow rate drops and the fault appears; check the noise/consumption of the pump, rotor rotation, and possible obstructions in the circuit and filters. |
| E02 | Pump protection / lack of circulation (MFFI/Combi A series). | The boiler enters 'pump protect' due to lack of flow (pump blocked or with air); check by bleeding the front cap of the pump, rotation/consumption, and primary pressure. |
These symptoms can have more than one cause. If your boiler displays a fault code, send it to us via WhatsApp along with a photo of the labeling, and we'll tell you if this is the part.
Data sheet for the Ariston circulator pump 60001584
- Catalogue reference
- 60001584
- Brand
- Ariston
- Type of part
- Pumps
- Units in stock
- 4 units
- Status
- Refurbished
- Warranty
- 1 year
- Shipping
- 1-2 business days
- Return
- 14 days
Data read on the part and in the manufacturer's documentation
What we have not been able to verify does not appear here.
- manufacturer
- Wilo
- model
- INTKSL15/5-1
- Wilo reference
- 6272340
- Article number
- 4526966
- Model class
- 15W13
- voltage
- 230V
- frequency
- 50Hz
- power
- 82W
- current
- 0.36A
- The actual manufacturer of the pump is Wilo, not Ariston; Ariston installs it in their boilers but does not manufacture it.
Manuals and technical documentation
Official documentation of the boiler, useful for locating the part and cross-referencing the fault codes.
- Ariston MATIS 24 FF NG Manual (PDF)Document © Ariston, provided as a technical reference.
Frequently asked questions about the circulator pump 60001584
Is the Wilo INTKSL15/5-1 pump the original one for an Ariston AS 24 FF?
Does this Wilo pump also work for an Ariston EGIS PLUS 24 FF?
What fault indicates that the Wilo pump of the Ariston MATIS 24 CF needs to be replaced?
What is the electrical consumption of the Wilo INTKSL15/5-1 pump installed in the Ariston AS 24 CF?
Spare parts related to Ariston EGIS 24 / EGIS PLUS 24
